We spent many hours on research to finding 10202 camshaft, reading product features, product specifications for this guide. For those of you who wish to the best 10202 camshaft, you should not miss this article. 10202 camshaft coming in a variety of types but also different price range. The following is the top 13 10202 camshaft by our suggestions:
![[2 Pcs] Intake + Exhaust Camshaft Position Actuator Solenoids For GM Chevy Malibu HHR Buick Pontiac 2.0L 2.2L 2.4L 12655420 12655421[USA Warehouse]](https://images-na.ssl-images-amazon.com/images/I/51sh7I6oJML.jpg)
Reviews
1. 10202 Chrysler Camshaft Phaser Locking Tool
Description
Camshaft Phaser Lock Pair 10202 These new Camshaft Phaser Locks are used to hold the Camshaft Phaser's while performing the loosening and tightening of the Oil Control Valves during service procedures on the 3.6 L Engine. NOTE: 10202-1 is used on the Right Bank and 10202-2 is used on the Left Bank. 2011 (Journey, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2012 (Journey, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2013 (Ram Truck 1500, Journey, JF, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2014 (Ram Truck 1500, Journey, JF, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, KL, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, VF, Durango, Grand Cherokee) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L)2. Automotive Bearing Cup Installer - Tiger Tool 10202
Feature
Installs two bearing cups in one procedure.Made in Canada.
Fits virtually all medium and light-duty universal joints
It is easy to use and only weighs 4 lbs!
The encased magnet allows for easy installation, freeing the mechanics hands to operate and maintain position of the bearing cup installer
Description
Install two bearing cups in one procedure on virtually all medium and light-duty U-joints.
- Encased magnet retains bearing cup in place freeing the mechanics hands to both operate an impact tool and maintain the position of the u-joint cross during the installation procedure.
- Manufactured fromhigh-grade metals for strength and durability.
- Simple to slip on for instant results.
3. Edelbrock 2102 Performer-Plus Camshaft and Lifter Kit
Feature
Hydraulic flat tappet style camshaft and lifterOffers improved throttle response and torque
Use only stock ratio rocker arms, which have to be purchased separately
Dual springs should not be included
Description
The Edelbrock Performer-Plus Camshaft and Lifter Kit are part of the total power package to produce optimum torque from the low-end to the mid-range. It features smooth idling cams for daily drivers, trucks or vans. The advertised intake duration is 278 degrees and the exhaust duration is 288 degrees. The camshaft comes with hydraulic lifters, assembly lube and full instructions. The intake valve lift with factory rocker arm ratio is 0.42 and the exhaust valve lift with factory rocker arm ratio is 0.442.4. [2 Pcs] Intake + Exhaust Camshaft Position Actuator Solenoids For GM Chevy Malibu HHR Buick Pontiac 2.0L 2.2L 2.4L 12655420 12655421[USA Warehouse]
Feature
Package Content: 1 x 12655420, 1 x 12655421; [2 Year Warranty]Intake Part Number:12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014
Exhaust Part Number: 12655421, 12628348,12646784,12578518, 12679100, 917216, 917-216, 2T1015
Displacement: 2.0 2.2 2.4L, it isn't fit for 2.5L;
Fits for GM 2.0L, 2.2L, 2.4L, Buick Regal, GMC Terrain, Pontiac G5, Chevy Malibu, year 2006 2007 2008 2009 2010 2011 2012 2013 2014
Description
To make sure our customer buy the correct part, please CONFIRM the OEM PART NUMBER.Fit for:
2005-2010 Cobalt
2009-2012 Chevy Malibu
2010-2014 Equinox
2008 Malibu with the new body style
2007-2010 Pontiac G5
2006-2010 Pontiac G6
2006-2010 Pontiac Solstice
2010-2013 Buick Lacrosse
2011-2013 Buick Regal
2006-2011 Chevy HHR
2010-2013 GMC Terrain
Part Number:
12655420, 12628347, 12646783, 12578517 917215, 917-215, 2T1014.
12655421, 12628348,12646784 ,12578518 917216, 917-216, 2T1015.
Installation Instructions For Buick (picture instructions are above):
Step 1: Prepare a 10mm spanner and a flat screwdriver, remove the engine cover, intake and exhaust solenoid valves are obvious. The gray plug is the intake, and the black is exhaust.
Step 2: Unplug the plug above the white insurance card, use a flat screwdriver up up the arrow at the top, press the middle of the buckle, then unplug the plug as shown.
Step 3: Use the spanner to unscrew fixed screw of the control valve as shown below.
Step 4: The broken control valve is somewhat tight, you can put a flat screwdriver on the plug, gently pull out the old valve.
Step 5: Take out the new control valve and tighten it with the spanner.
Step 6: Start the vehicle, check the instrument panel to see whether the engine fault light is off, whether the idling operation is stable.
Attention:
Not Fit for 2009 Chevy Aveo; Do not fit 2009 GMC Sierra 1500 5.3.
Reference opinions from Customer reviews:
1.Fixed codes P0010 and P0011.
2.It fixed our P0013 code.
3.Both were labeled well so nearly impossible to mix up.
4.Can't beat the price. Working great after a few months now.
5.My car was dying and running rough. These fixed it in twenty minutes. Simple repair for variable valve timing.
5. Universal 10202 Pressboard Folder, Letter, Four-Section, Emerald Green (Box of 10)
Feature
Heavy-duty covers in vivid colors.2" capacity prong fasteners inside front and back 25 pt. pressboard covers.
1" capacity metal fastener on each side of 17 pt. brown Kraft dividers.
Description
Heavy-duty covers in vivid colors are the perfect way to create an efficient color-coded filing system. Organize and subdivide materials with 2" capacity prong fasteners inside front and back 25 pt. pressboard covers. 1" capacity metal fastener on each side of 17 pt. Kraft dividers. Tyvek reinforced gusset for added durability during expansion. 2/5 cut tabs, right of center.6. Sunex 10202 4 Wheel Drive Spindle Nut Wrench
Feature
Forged from CR-V alloy steel for maximum strengthServices 1988-95 Isuzu Trooper, Rodeo, Amigo, and pickups; 1985-89 Honda Passport; Jeep J20 pickups with Dana 60 Axle
This socket is not intended for use with an impact tool of any kind
1/2-Inch drive spindle nut socket
Lifetime Warranty (void if used with impact tool)
Description
For those jobs that require a specialized tool, look no further than Sunex Tools specialty application sockets. Sunex is always looking to make the technician's life easier, one tool at a time.7. ACDelco 213-1690 GM Original Equipment Engine Camshaft Position Sensor
Feature
GM-recommended replacement part for your GM vehicle's original factory componentOffering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function
Description
An ACDelco GM Original Equipment Engine Camshaft Position Sensor monitors the rotational position of the camshaft(s), and is a GM-recommended replacement for your vehicles original component. It provides a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. This original equipment engine camshaft position sensor has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.8. Claude Bernard Men's 10202 37N JN Analog Display Swiss Quartz Black Watch
Feature
Sporting soul, aquarider dive watch, stainless steel PVD coating, sapphire crystalUnidirectional bezel, water-resistant to 220 M 220, screw down crown, chronograph
Swiss-quartz Movement
Case Diameter: 44mm
Water Resistant To 660 Feet
9. CIFIC CM420R Ford Mercury Lincoln 4.6L & 5.4L SOHC 3-Valves Camshafts Right Passenger Side
Feature
This is a 100% brand new aftermarket replacement part. Made to meet or exceed OEM's standards.Ready to install, no modification required
Factory tested
All our products come with 1 year of warranty
Description
Product Description:
Application
Ford Expedition 5.4L 3V 2005-2008
Ford Explorer 4.6L 3V 2006-2010
Ford Explorer Sport Trac 4.6L 3V 2007-2008
Ford F150 5.4L 3V 2005-2008
Ford F250 5.4L 3V 2005-2008
Ford F350 5.4L 3V 2005-2008
Ford F450 5.4L 3V 2005-2008
Ford F550 SD 5.4L 3V 2005-2008
Lincoln Mark LT 5.4L 3V 2005-2008
Mercury Mountaineer 4.6L 3V 2005-2010
Ford Mustang 4.6L 3V 2005-2010
Lincoln Navigator 5.4L 3V 2005-2008
Shipping:
We offer free FedEx Ground Shipping on all our products for the 48 continental states in the US.
If you place an order and pay before 3:00PM (PST) during a workday, we will process the order and ship on the SAME DAY!
Return Policy:
All returns of new and unused parts are accepted within 30 days of the purchase.
It is the buyer's responsibility to make sure they are buying the right product.
Buyer will have to pay for the return shipping, and we are subject to charge 20% restocking fee.
Warranty:
All our stock replacement camshaftf & parts are warranted against defects in material and workmanship for a period of one year from the date of original invoice.
Contact:
If you have any question, please call our office at 1-714-256-5555 or leave us a message on Amazon. We will get back to you as soon as possible.
Advise:
You have to be aware if the product you are purchasing is the correct fit for your car. Also compare you product with the pictures we post on the listing. We not responsible for paying for return shipping if you purchase the incorrect item.
10. Blox Racing BXCM-10202 Type-C Camshaft for Honda/Acura K-Series DOHC i-VTEC Engine
Feature
Made of quality materialsBlox Racing K-series DOHC i-VTEC Type-B camshafts are ideal for mild to highly modified engine builds
Intake: 232.6 degree/0.486 inch; exhaust: 235.1 degree/0.415 inch (measured at primary lobes at 0.050 duration)
Intake: 278.3 degree/0.531 inch; exhaust: 296 degree/0.495 inch (measured at secondary lobes at 0.050 duration)
Upgraded valvetrain, cylinder head porting, high compression, upgraded tensioner and ECU are required; Honda RBC or RRC intake manifold is recommended
Description
Blox Racing K-series camshafts are designed and manufactured using OEM-spec, gun-drilled camshaft cores. Blox Racing spends countless hours designing, engineering and testing so each product is able to offer the enthusiast both form and function. The manufacturing processes used either meet or exceed OEM standards, while materials reflect the same quality used by major OEM auto manufacturers. Blox Racing and its manufacturing partners meet or exceed ISO 9001 certification which further ensures Blox Racing's overall commitment to the highest standards of production management and quality control. Blox Racing is dedicated to the development of high quality performance products and accessories for today's import and sport compact enthusiast. Each product is designed and manufactured using the latest in cutting-edge technologies, processes and materials and then tested using rigorous standards. Each Blox Racing product is designed to work with one another, giving enthusiasts the proper foundation and building blocks for developing the right performance combination.11. CT48210-10202 : CAMSHAFT FOR CATERPILLAR
Feature
CATERPILLARAll Brand new & rebuilt items comes with 1 year warranty.
CAMSHAFT FOR CATERPILLAR FORKLIFT. CATEGORY : FORKLIFT PARTS - CATERPILLER/TOWMOTOR. THIS ITEM CAN ALSO BE FOUND UNDER THE FOLLOWING PART NUMBERS: CATERPILLAR/TOWMOTOR 48210-10202, CT 4821010202, CT48210-10202, CATERPILLAR/TOWMOTOR48210-10202, CATERPILLAR/TOWMOTOR4821010202, 4821010202, CT4821010202, CATERPILLAR/TOWMOTOR 4821010202, CT 48210-10202, 48210-10202
Description
CAMSHAFT FOR CATERPILLAR FORKLIFT. CATEGORY : FORKLIFT PARTS - CATERPILLER/TOWMOTOR. THIS ITEM CAN ALSO BE FOUND UNDER THE FOLLOWING PART NUMBERS: CATERPILLAR/TOWMOTOR 48210-10202, CT 4821010202, CT48210-10202, CATERPILLAR/TOWMOTOR48210-10202, CATERPILLAR/TOWMOTOR4821010202, 4821010202, CT4821010202, CATERPILLAR/TOWMOTOR 4821010202, CT 48210-10202, 48210-1020212. Chrysler Camshaft Phaser Locking Tools Miller 10202 & Timing Chain Holders 10200
Feature
Chrysler Camshaft Phaser Locking Tools Miller 10202 & Timing Chain Holders 10200Description
Faster shipping options available "before" paying. Included in this combo kit are the Camshaft Phaser Locks Miller on 10202 and 10200A (AKA 10200) Timing Chain Holder Set used on Chrysler 3.6 engines. Also works on 3.6L 2011 and 2012 VW Routan (Re-badged variation of Dodge/Chrysler Mini Van). 10202 - New Camshaft Phaser Locks are used to hold the Camshaft Phaser's while performing the loosening and tightening of the Oil Control Valves during service procedures on the Chrysler, Dodge, Jeep 3.6 L Engine. NOTE: 10202-1 is used on the Right Bank and 10202-2 is used on the Left Bank. The partial listing below. 10200A - AKA 10200 These new Timing Chain Holders are used as wedges to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures on the 3.6 L Engine. NOTE: 10200-1 & 10200-3 are used on Driver's Side 10200-2 is used on Passenger's Side. 2011 (Journey, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2012 (Journey, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2013 (Ram Truck 1500, Journey, JF, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, Durango, Grand Cherokee) - Systems (9 - Engine, 3.6L) 2014 (Ram Truck 1500, Journey, JF, Wrangler, 200, 200 Convertible, Avenger, Sebring, Sebring Convertible, KL, Challenger, Charger, 300, 300C, Charger, Magnum, Grand Caravan, Caravan, Town & Country, VF, Durango, Grand Cherokee) - Systems (9 - Engine, 3.0L Gasoline, 9 - Engine, 3.2L, 9 - Engine, 3.6L)13. Chrysler Camshaft Phaser Locking Tools Miller 10202 & Timing Chain Holders 10200