We spent many hours on research to finding x4r-sb receiver, reading product features, product specifications for this guide. For those of you who wish to the best x4r-sb receiver, you should not miss this article. x4r-sb receiver coming in a variety of types but also different price range. The following is the top 13 x4r-sb receiver by our suggestions:
Reviews
1. iFlight 2.4G Receiver Antenna with IPEX Interface Compatible with Futaba FrSky Silver-plated Feeder (20pcs)
Feature
Cable Type: RG-113 (coaxial line: RG-1.13)Connector Type: IPEX (Bigger)
Material: silver-plated, Cable length:15cm
Application: for 2.4G FUTABA/FRSKY/JR Receiver, monitor, model airplane, bluetooth etc
Precision machining, Low loss signal stability
Description
Item specificsUse: Vehicles and Remote Control Toys
Technical parameters: Value 2
For Vehicle Type: Helicopters
Tool Supplies: Assembly Category
Material: Plastic
RC Parts & Accessories: Antennas
Plastic Type: ABS
Model Number: 2.4G Receiver Antenna
Four-wheel Drive Attributes: Assemblage
Remote Control Peripherals Devices: 2.4G Receiver Antenna Upgrade Parts Accessories: 2.4G Receiver Antenna
A.Electrical Characteristics:
Frequency:2400-2500 MHz Antenna Gain :2.0
Polarization : Linear
Impedance : 50 Ohm
B.Material & Mechanical Characteristics
Cable Type : RG-113
Connector Type: IPEX
C. Environmental
Operation Temperature -40C~ +65 C
Storage Temperature -40 C ~ +80 C
Features:
Used for FrSky 2.4G receiver, Futaba 2.4G receiver
Package includes:
20pcsx 2.4G receiver antenna
Note:If you need a smaller connector for the latest FRSKY X4R-SB,
please check this link:
https://www.amazon.com/dp/B06XGD445X
2. iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 (smaller) IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller ( pack of 20pcs )
Feature
RF-113 Silver-plated feeder cableIPEX 4 Generation interface
Precision machining,Low loss signal stability
A must have for Frsky XM+ and X4R rx/tx field repair
Smaller ipex connector type fit for new FRSKY X4R-SB receiver
Description
2.4G remote control, surveillance, model aircraft, receivers, Bluetooth and other antennasUse: Vehicles and Remote Control Toys
Frequency:2400-2500 MHz
S.W.R: Less than or equal to 1.5
Radiation Pattern: Omni-Directional
Connector: Ipex 4 generation
Radiator Material:Cu
Package included:
20pcs x antennas
3. TBS WhiteNoise FPV UNIFY PRO MOUNTING BOARD - PRO V2 (5V Only) Version
Feature
WhiteNoise FPVUNIFY-PRO-MOUNTING-BOARD-PRO-V2-5V
Description
TBS WhiteNoise FPV UNIFY PRO MOUNTING BOARD - PRO V2 (5V Only) Version
Allows a Team BlackSheep Unify Pro and FrSky D4R or X4R-SB to be mounted on a board for a low profile and clean stacking solution. The pads around the Unify are meant to hard mount the video transmitter to the board. Once the Unify is mounted, you can either use the plug that comes with the Unify or directly solder the wires to the pads. The button extension can also be used with this by connecting one of the pads of the button to the board. From there, you can use the button extension with the Riptide LED Back Plate.
The FrSky receivers do not have to be used with this board. Spektrum, Futaba, etc receivers can work. You can connect the receiver directly to the flight controller (ignore the receiver portion on the board) or connect the receiver to one of the header pins on the Unify Mounting Board and use the pads as intended. The solder bridge pads will still have to be used to select which headers you will be using.
For:
TBS Unify Pro Video Transmitters
FrSky D4R-II, X4R-SB
Can also work with Spektrum, Futaba, or any other receiver
4. Frsky XM Plus Mini Full Range Receiver Failsafe D16 Mode Support SBUS Up Compatible With Frsky X9D / X9D Plus X9E X12S Transmitter.
Feature
1. It's a full range receiver, similar range to X4R-SB and XSR, Much smaller size and lighter weight2. It's possible to direct solder RX to FC with header pins without wires (if FC supports it)
3. XM+ is even smaller than the LR1000 by FuriousFPV, great RX option for their micro quads (such as the Moskito70)
4. Only downside of XM+ RX is the lack of S.Port full telemetry (Smart Port), there is only RSSI telemetry. RSSI has a dedicated solder pad and it's also available on the 16th channel.
5. RSSI pin outputs PWM signal (0-3.3V). Please be aware that this signal should not be connected to MinimOSD directly, as it will give you 0% or 100% only. You will need a digital to analogue converter (low pass filter) to convert PWM to analogue voltage level.
Description
General This insanely tiny 2.4GHz diversity receiver available Package Including Frsky XM Plus receiver5. FrSky X4RSB 3/16CH Telemetry Receiver Full Range
Feature
RSSI (PWM) outputLighter weight and physically smaller than D8R-II & D6FR
Two selectable failsafe setting options - native failsafe or user programmable failsafe
S.Bus port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servo
External analog telemetry port (AD2)
Description
Description:- Brand name: FrSky
- Item name: FrSky X4RSB 3/16ch Telemetry Receiver
- Dimension: 40*22.5*6mm (L x W x H)
- Weight: 5.8g
- Operating Range: full range (>1.5km)
- Operating Voltage Range: 4.0~10V
- Operating Current: 100mA@5V
- Number of Channels: 3/16Ch (1~3ch from conventional channel outputs,1~16ch from SBUS channel)
- Compatibility: FrSky X-series Module (XJT etc.) Taranis X9D in D16 mode(X4RSB is not work with D-series Module)
6. 5Pcs FRSKY Upgraded Version Smaller Antenna for X4R-SB X4R XSR Receiver
Feature
Description brand name: frsky.Length: 16cm item name: frsky receiver antenna.
Description
5Pcs FRSKY Upgraded Version Smaller Antenna for X4R-SB X4R XSR ReceiverDescription
Brand Name: FrSky
Length: 16CM
Item Name: FRSKY Receiver Antenna
Quantity: 5
Suitable receiver: X4R, X4R-SB ,XSR
Package Included:
5 x FrSky Receiver Antenna
7. FRSKY Upgraded Version Smaller Antenna for X4R-SB X4R XSR Receiver
Feature
Description Brand Name: FrSkyLength: 16CM Item Name: FRSKY Receiver Antenna
Description
FRSKY Upgraded Version Smaller Antenna for X4R-SB X4R XSR ReceiverDescription
Brand Name: FrSky
Length: 16CM
Item Name: FRSKY Receiver Antenna
Suitable receiver: X4R, X4R-SB ,XSR
Package Included:
1 x FrSky Receiver Antenna
8. Toolcool FrSky Naked X4R-SB 2.4G 16CH ACCST Telemetry Receiver For FrSky Taranis Taranis Plus & XJT module
Feature
Note: This is Naked Receiver!Compatibility:FrSky Taranis, Taranis Plus, & XJT module (Not suitable for EU version)
FrSky's X4R-SB receiver features 3 PWM outputs (normal servo) and 1 Sbus port that carries all 16 channels. Plus the exciting new Smart Port and a traditional A2 port are all located on the side port of the receiver. A FrSky FBVS can be connected to the A2 port for simple voltage monitoring.
Smaller than the X6R, but still packing 16 channels and the new Smart Port that supports the new hubless digital sensors! Or, connect the new vario, and then connect the old hub to use existing analog sensors.
A common question is what can the SBus port do. First off, you can connect it to many flight controllers via a single connection, and now you have access to all 16 channels. Or, you can use something like the FrSky Sbus Decoder, this will allow you to add 4 normal servo outputs (pwm). You can also connect Sbus servos directly to the Sbus line. Just "Y" in as many SBus devices as you need.
Description
Dimension: 40*22.5*6mmWeight: 5.8g / 5g (naked)
Number of Channels: 16CH
Operating Voltage Range: 4V-10.0V
Operating Current: 100mA@5V
Operating Range: >1.5km (Full Range)
Note: This is Naked Receiver!
Compatibility:FrSky Taranis, Taranis Plus, & XJT module (Not suitable for EU version)
Package Included:
1 x FrSky Naked X4R-SB Receiver
9. Dreamyth FrSky X4RSB X4R-SB 3/16 Channel Telemetry Receiver For RC Multicopter (Multicolor)
Feature
RSSI (PWM) outputLighter weight and physically smaller than D8R-II & D6FR
Two selectable failsafe setting options - native failsafe or user programmable failsafe
External analog telemetry port (AD2)
SB port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servo
Description
Description:
- Brand name: FrSky
- Item name: FrSky X4RSB 3/16ch Telemetry Receiver
- Dimension: 40*22.5*6mm (L x W x H)
- Weight: 5.8g
- Operating Range: full range (>1.5km)
- Operating Voltage Range: 4.0~10V
- Operating Current: 100mA@5V
- Number of Channels: 3/16Ch (1~3ch from conventional channel outputs,1~16ch from SBUS channel)
- Compatibility: FrSky X-series Module (XJT etc.) Taranis X9D in D16 mode(X4RSB is not work with D-series Module)
Features:
- RSSI (PWM) output
- Lighter weight and physically smaller than D8R-II & D6FR
- Two selectable failsafe setting options - native failsafe or user programmable failsafe
- External analog telemetry port (AD2)
- SB port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servo
Package Included:
1 x FrSky X4RSB Receiver
10. WhiteNoise FPV TBS Unify Pro Mounting Board - V2 Version - RED
Feature
WhiteNoise FPVUNIFY-PRO-MOUNTING-BOARD-V2-R
Description
WhiteNoise FPV TBS Unify Pro Mounting Board - V2 Version - RED
Allows a Team BlackSheep Unify Pro and FrSky D4R or X4R-SB to be mounted on a board for a low profile and clean stacking solution. The pads around the Unify are meant to hard mount the video transmitter to the board. Once the Unify is mounted, you can either use the plug that comes with the Unify or directly solder the wires to the pads. The button extension can also be used with this by connecting one of the pads of the button to the board. From there, you can use the button extension with the Riptide LED Back Plate.
The FrSky receivers do not have to be used with this board. Spektrum, Futaba, etc receivers can work. You can connect the receiver directly to the flight controller (ignore the receiver portion on the board) or connect the receiver to one of the header pins on the Unify Mounting Board and use the pads as intended. The solder bridge pads will still have to be used to select which headers you will be using.
For:
TBS Unify Pro Video Transmitters
FrSky D4R-II, X4R-SB
Can also work with Spektrum, Futaba, or any other receiver
11. WhiteNoise FPV TBS Unify Pro Mounting Board - V2 Version - YELLOW
Feature
WhiteNoise FPVUNIFY-PRO-MOUNTING-BOARD-V2-Y
Description
WhiteNoise FPV TBS Unify Pro Mounting Board - V2 Version - YELLOW
Allows a Team BlackSheep Unify Pro and FrSky D4R or X4R-SB to be mounted on a board for a low profile and clean stacking solution. The pads around the Unify are meant to hard mount the video transmitter to the board. Once the Unify is mounted, you can either use the plug that comes with the Unify or directly solder the wires to the pads. The button extension can also be used with this by connecting one of the pads of the button to the board. From there, you can use the button extension with the Riptide LED Back Plate.
The FrSky receivers do not have to be used with this board. Spektrum, Futaba, etc receivers can work. You can connect the receiver directly to the flight controller (ignore the receiver portion on the board) or connect the receiver to one of the header pins on the Unify Mounting Board and use the pads as intended. The solder bridge pads will still have to be used to select which headers you will be using.
For:
TBS Unify Pro Video Transmitters
FrSky D4R-II, X4R-SB
Can also work with Spektrum, Futaba, or any other receiver
12. Baoblaze 2.4G Receiver Antenna with IPEX Interface Compatible with Futaba FrSky 150mm
Feature
A must have for Frsky XM+ and X4R rx/tx field repairConnector Type: IPEX (Bigger)
Material: silver-plated, Cable length:15cm
Application: for 2.4G FUTABA/FRSKY/JR Receiver, monitor, model airplane, bluetooth etc,smaller ipex connector type fit for new FRSKY X4R-SB receiver.
Precision machining, Low loss signal stability.
Description
Description:
- A must have for Frsky XM+ and X4R rx/tx field repair
- Connector Type: IPEX (Bigger)
- Material: silver-plated, Cable length:15cm
- Application: for 2.4G FUTABA/FRSKY/JR Receiver, monitor, model airplane, bluetooth etc,smaller ipex connector type fit for new FRSKY X4R-SB receiver.
- Precision machining, Low loss signal stability.
Specification:
- Material: silver-plated
- Cable length: 15cm
- Cable Type: RG-113 (coaxial line: RG-1.13)
Package Includes:
1 piece Silvering Feeder Antenna
13. Homyl 150mm 2.4G Receiver Feeder line Antenna For FUTABA/FRSKY/JR Receiver Grey
Feature
A must have for Frsky XM+ and X4R rx/tx field repairConnector Type: IPEX (Bigger)
Material: silver-plated, Cable length:15cm
Application: for 2.4G FUTABA/FRSKY/JR Receiver, monitor, model airplane, bluetooth etc,smaller ipex connector type fit for new FRSKY X4R-SB receiver.
Precision machining, Low loss signal stability.
Description
Description:
- A must have for Frsky XM+ and X4R rx/tx field repair
- Connector Type: IPEX (Bigger)
- Material: silver-plated, Cable length:15cm
- Application: for 2.4G FUTABA/FRSKY/JR Receiver, monitor, model airplane, bluetooth etc,smaller ipex connector type fit for new FRSKY X4R-SB receiver.
- Precision machining, Low loss signal stability.
Specification:
- Material: silver-plated
- Cable length: 15cm
- Cable Type: RG-113 (coaxial line: RG-1.13)
Package Includes:
1 piece Silvering Feeder Antenna