Finding your suitable scope mount is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best scope mount including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. Monstrum Tactical High Performance Cantilever Dual Ring Scope Mount, Offset Design (1 inch diameter)
Feature
Dual ring scope mount for mounting standard 1 inch tube rifle scopesMounts to any flat top Picatinny rail equipped rifle
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
Lightweight 6061 grade aluminum construction
Description
The Monstrum Tactical Offset Dual Ring Picatinny Scope Mount is built to mount standard 1 inch tube scopes to any standard Picatinny rail equipped rifle. The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position.The mount is 5.75 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install. The height between the top of the base to the bottom of the scope rings is 1 inch, providing 1 inch of vertical clearance. The mount is constructed of lightweight 6061 aluminum, the mount weighs a mere 9 ounces.
2. CCOP High Profile AR-ArmourTac Rifle Scope Mount Rings for Picatinny Rail, 1-Inch, Black
Feature
Fits a 1-inch rifle scopeHigh Profile
T6061 aluminum alloy
Rigorously field tested for performance
Description
High Profile AR-ArmourTac 1-inch Rifle Scope Mount Rings for Picatinny Rail Precision machined from T6061 aluminum alloy with maximum strength. Enhanced AR one-piece construction mount. It has Mil-spec. Picatinny rails for universal mounting. Simple, user friendly installation; no Gunsmith or tool required. Rigorously field tested for performance. Torx screws and driver included. 2" Forward Extension.3. Weaver Scope Rings, Modkin High Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
Feature
Double scope ring mount for Picatinny/ Weaver Rail (20mm).Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.
Description
Features:Fits all 20mm picatinny and weaver rails.
The ring is for most scopes which are in 1''/ 25.4mm scope tube.
Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.
Precision and Repeatable Alignment.
Specification:
Rail Type: 20mm Weaver/ Picatinny Rails
Ring Diameter: 1''
Material: High Quality Aluminum Alloy
Style: High Profile (0.98in)
Dimension: 2.1 x 1.8 x 0.6 inch
Weight: 1.34oz per ring
Package Content:
2 pcs 1'' Weaver Scope Rings
1 x Hex Wrench
4. Weaver Scope Rings, Modkin High Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
Feature
Double scope ring mount for Picatinny/ Weaver Rail (20mm).Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.71'' gap from base of mount to bottom of rings. ( Item height: 2'')
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.
Description
Features:Fits all 20mm picatinny and weaver rails.
The ring is for most scopes which are in 1''/ 25.4mm scope tube.
Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.
Precision and Repeatable Alignment.
Specification:
Rail Type: 20mm Weaver/ Picatinny Rails
Ring Diameter: 1''
Material: High Quality Aluminum Alloy
Style: High Profile (0.71in)
Dimension: 2.1 x 1.6 x 0.8 inch
Weight: 2 oz per ring
Package Content:
2 pcs 1'' Weaver Scope Ring
1 x Hex Wrench
5. AccuShot Picatinny/Weaver Medium Profile 2-piece 1-inch Rings
Feature
SCOPE MOUNTSDescription
UTG 1 inch/2pcs medium profile Picatinny/Weaver rings specifications: material: aluminum pieces: 2 rail type: Picatinny/Weaver profile level: medium ring diameter: 1 inch max. Scope outer Dia.: 53 mm screws per ring: 46. Mizugiwa 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount
Feature
Fits 20mm Picatinny Weaver railsFront ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings
Heavy duty - will hold up under heavy recoil sustained fire in the most extreme circumstances.
PEPR Proper eye position ready for combat riflescopes, mount provides 2" of forward scope positioning on the .223 flat top platform
Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories
Description
Fits 20mm Picatinny Weaver rails, Flat Top Dual Ring Scope Mount for Vortex, Nikon, Leupold and other scopes, ar-pep Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings Heavy duty - will hold up under heavy recoil sustained fire in the most extreme circumstances. Easy installation with minimal effort over the Barrel and the cleaning rod PEPR Proper eye position ready for combat riflescopes, mount provides 2" of forward scope positioning on the .223 flat top platform. Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories7. Pinty 1 Inch 25.4 mm 30mm Scope Mount Solid Black Cantilever Flat Top Dual Ring Adjustable
Feature
Fits 20mm picatinny weaver rails & comes with 25.4mm reducer inserts,fit for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.Scope mount with two round buttons for easy detach.
Built-in weaver style rails perfectly fit flashlights and lasers.
Heavy duty, hold up under heavy recoil sustained fire in the most extreme circumstances.
Easy installation with minimal effort over the barrel and the cleaning rod.
Description
Specifications:Material: Aluminum Alloy
Color: Black
Ring Diameter: 30mm (1.2")
Reducer Diameter: 25.4mm (1")
Product weight: 0.5lbs.
Package dimensions: 5.71"x 2.56"x 2.56"
Package includes:
1 x Dual Ring Scope Mount
2 x Reducer
1 x Wrench
Seeking for a solid and premium-quality 30mm & 25.4 mm Solid Black Cantilever Flat Top Dual Ring Scope Mount? This is the right one for you! Black color & proper eye position are ready for this combat rifle scopes. Fit for both 30mm and 25.4 mm (1 inch) body tube rifle scopes. Ring bases are milled as a single, tough unit, and rear ring tops feature picatinny tops for mounting additional accessories. Front ring top feature picatinny for mounting laser flashlight and compact red dot and so on. The cool mount is sturdy and solid. The 12 screw rings make it hard to move if installed correctly. Wanna be an excellent sharpshooter with a fair price? NO more hesitation to get it!
8. Nikon P-Series Riflescope Picatinny Mount for 1 Inch Tube
Feature
Allows Proper Height, Eye Relief and Forward Position for Charging-Handle Access on Virtually Any RifleStrong-Yet-Lightweight Alloy Construction
For One Inch Tube Diameter Riflescopes, Fits flattop picatinny rails
Reversible 2-Piece Mount Provides Extreme Mounting Flexibility
Made in the United States of America
Description
The 2-piece design of the P-Series Mount allows proper mounting height and proper fore-aft positioning for proper shooting technique with comfortable eye relief.9. Twod 1''/30 mm Quick-Release Extended Scope Mount Picatinny-Style with Integral Rings Flattop
Feature
Quick detachable (QD) mount allows you to remove or replace your optic quickly and easily.Use this cantilever mount for mounting 30 mm or 1" optics onto most flattop style rifles.
Available with an extension to mount the scope in a forward position for the ideal eye relief and head placement.
The mount is compatible with Picatinny/Weaver style rails and holds your scope's optical axis at a height of about 1.59'' above the rail.
Extremely lightweight 7.95 oz. aluminum construction, durable matte black anodized finish.
Description
Description:1. One-piece, aluminum mount with integral rings is precision machined for a secure fit on flattop receiver rails.
2. The integrated quick detach lever system provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require.
3. Mounts available for 1"/30mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes.
4. Full-length base clamps to the receiver with two crossbolts for a rock-solid fit.
5. Constructed of lightweight, strong, aircraft-grade aluminum with a black matte anodized finish.
Height: about 1.59" (measured from top of rail to center line of scope tube)
Material: Aluminum
Weight: 7.95 oz.
Length: 7.09''
Style: Picatinny
Distance Between Rings: 2.49''
Exterior Dimensions (Outside of ring to outside of ring): 4.41''
Color: Black
Package Included:
1X Scope Mount
2X Adapters
1X Clean Cloth
1X Allen Wrench