If you looking for pullers set then you are right place. We are searching for the best pullers set on the market and analyze these products to provide you the best choice.
Reviews
1. Goplus 3 PCS Pneumatic Rear Axle Bearing Puller Set With Case
Feature
Comes with storage case; Material of tool: 45# steelSet works on most domestic cars
Washer captures the bearing firmly
Allows for easy removal of semi-floating rear axle bearings
Set includes 3 bearing puller and here are size : 1" to 1-7/8", 1-5/16" to 2-3/8", 1-3/8" to 2-7/8".
Description
This is our 3 pieces pneumatic rear axle bearing service set. This tool set is made of heavy duty steel. With the help of this tool set, it will be easy to remove semi-floating rear axle bearings. Our this set works on most domestic cars. There is a carry case for the 3 pieces tool, and it will be convenient for your storage and carry them. Do not hesitate, just buy one!2. ABN 3-Jaw Gear Puller Set – 3”, 4”, and 6” Inch Removal Tool Kit for Slide Gears, Pulley, and Flywheel
Feature
DAMAGE-FREE REMOVAL: The ABN 3-Jaw Gear Puller Set - 3", 4", and 6" Inch Removal Tool Kit for Slide Gears, Pulley, and Flywheel makes removal simple and damage-freeBUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
4 OR 8 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 4 positions and the 4-inch and 6-inch gear pullers both have 8 positions
PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
Description
Safely remove gears, sprockets, bearings, pulleys, and flywheels with the ABN 3-Jaw Gear Puller Set. These 3 tools feature reversible jaws for inside and outside pulling and has multiple positions, which gives you maximum versatility. They all can be set for either short reach or long reach positions. You can use any hand wrench (14mm for 3" puller; 15mm for 4" puller; 17mm for 6" puller), ratchet, or combination spanner on the hex head screw for gear or bearing removal. Even if you need to pull rusted bearings, this will get the job done. You can even use these on tie rod ends or other suspension/steering applications. The forged and hardened steel construction will help you pull gears with zero damage. Invest in the ABN 3-Jaw Gear Puller Set - There is no other way to get the job done!3. Goplus Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit (16 PCS)
Feature
High Hardness and ToughnessThis is Goplus bearing puller set, which has high hardness and toughness. Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using.Wide Range of ApplicationsWith different size and type of collets, Blind / Internal /Bearing Puller, this tool set fit a wide range of applications.
Easy to UseInsert collect, expand it to fit the hole, and attach the slide hammer assembly.
Multi PurposesIdeal for pulling jobs, against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use.
Convenient for Storing and CarryingWith a durable storage case, you could easily and neatly collect the tools and easily bring it to anywhere you like.
Description
Our 16pcs Inner Bearing Extractor Puller Set Is Designed For For Removal Of Pilot Bushes Bearings Etc. Form Blind Housings. Made Of Chrome And Steel, This Tool Set Is Sturdy And Reliable. Moreover, With The Rust-Proof Treatment In The Surface, This Tool Set Will Serve You A Long Time. Do Not Hesitate To Buy One!Feature
High quality and brand new
One Slide hammer assemble 2.5 jaws
For both the Professional and Diy use
Split collet type Blind / Internal /Bearing Puller
Collets are made from chrome molybdenum steel
Turn and they expand to grip the inner bearing race
Rust-proof finish of tool set for long-lasting using
With a red case, convenient for storing and carrying
Specifications
Color: black tool and red carry case
Material of tool: chromium and steel
Size of 10 collects: 8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm
Thread:M101.5p, M101.5p,M81.25p, M101.5p M61.0p
Screw adaptors M10x1.5p, M10x1.5p/M8x1.25p, M10x1.5p/M6x1.0p
4. OTC 4579 9-Way Slide Hammer Puller Set
Feature
Pulls flange-type rear axles and most front-wheel drive hubsInternal and external jaws provide a variety of combinations to pull bearings gears and seals
Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs
Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements
Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments
Description
The OTC 9-way slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. Two and three way cross blocks and cone provide the perfect jaw configuration for most jobs. The set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements as well as a blow-molded case. The set is designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.5. OEMTOOLS 25922 Dent Puller Set
Feature
12 Lbs. Hammer, Slide Hammer Shaft, Slide Hammer Handle, Slide Hammer Adapter, Deep Hook, Short Hook, Door Edge Tool, Claw, Straight Driver, Hook and Chain, Sheet Metal Screw and Holder, Nose Piece with ScrewComes in a Blow mold Storage Case
Fully Dropped Forged Steel Accessories for Strength and Durability
For use with steel and aluminum rivets noses: 1/8-Inch (32 mm), 5/32-Inch (40 mm), 3/16-Inch (48 mm), 1/4-Inch (64 mm)
Description
The OEMTOOLS Dent Puller Set is ideal for removing those stubborn dents! This Set comes with a variety of attachments to remove dents in hard to reach places. Set includes: 12Lb Hammer, Slide Hammer Shaft, Slide Hammer Handle, Slide Hammer Adapter, Deep Hook, Short Hook, Door Edge Tool, Claw, Straight Driver Hook and Chain, Sheet Metal Screw and Holder, and Nose Piece with Screw. Fully dropped forged steel accessories for strength and durability. Comes in blow mold storage case.6. GearWrench 41700D 10 Way Slide Hammer Puller Set
Feature
10 WAY SLIDE HAMMER PULLER (KDT-41700)Description
This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Contents: Shallow Flange Deep Flange Slide Hammer 2 Way Yoke 3 Way Yoke Center Bolt and Cone 3 Pc. Adapter Set Leg Package with Screws7. Neiko 02236A Automotive Slide Hammer Puller Set | Steel T-handle | Chrome Vanadium Steel Attachments | 17-Piece Set
Feature
Easily remove mechanical, press-fit parts (bearings, bushings, gears, pulleys, etc.) from a shaft; Remove shafts from inside a hole5-pound steel slide hammer constructed of chrome vanadium steel for smooth operation, improved durability, corrosion resistance
Full kit, ideal for use on a wide variety of pulling applications, including pulling dents; Fits many sizes of bearings, gears and shafts
Includes an external 3-jaw puller, internal 3-jaw puller, external 2-jaw puller, internal 2-jaw puller
5-lb hammer, shank,T-bar assembly, grip wrench adapter, dent puller, pulling (cone) adapter, seal hook; Hard plastic blow-molded carrying case
Description
The industrial grade Neiko Slide Hammer Puller Set is for automotive body work in addition to pulling bearings, gears and front wheel drive axle shafts. The combination puller with 5 lb. steel hammer, steel pullers and attachments shafts and accessories. 2 or 3 jaw internal/external axle puller adapter. Set includes a heavy duty carrying and storage case.8. TEKTON 5696 Gear Puller Set, 3-Piece
Feature
Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damageUniversal 4- or 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach
High-strength forged and hardened steel jaw arms
Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
Set Includes: (1) 3 in. 3-Jaw Gear Puller, (1) 4 in. 3-Jaw Gear Puller, (1) 6 in. 3-Jaw Gear Puller
Description
Smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft with the versatile TEKTON 5696 3-pc. 3-Jaw Gear Puller Set. Three pullers fit a wide range of sizes and feature a universal design that can grip eight different ways: around outside edge or through inside openings while set in short, standard, long or extra long reach positions. Three jaws evenly distribute powerful pulling forces, protecting edges of gear from bending or chipping damage. Turn drive screw with any style hand wrench or ratchet and the precise, cold-rolled acme threads glide along smoothly without binding or chattering, even under high stress.
Set Includes:
- (1) 3 inch 3-jaw gear puller (# 5680)
- (1) 4 inch 3-jaw gear puller (# 5685)
- (1) 6 inch 3-jaw gear puller (# 5690)
9. Alltrade 648611 Kit 41 Master Axle Puller Tool Set
Feature
Made to be the most reliable tools in the market todayTool solutions for most all situations
Built to exceed tool standards
Tool set for removing front and rear axle bearings
Removes seals from front and rear wheel vehicles
Also functions as a slide hammer for dent pulling and gear pulling duty
Storage case includes usage photos
Kit 41 includes 21-Piece for pulling the master axle
Description
The Powerbuilt Master Ball Joint Service Kit is designed for removing front and rear axles, axle bearings and seals from front and rear wheel drive vehicles. This kit can also be used as a slide ha millimeter for dent pulling and gear pulling duty. The carry case includes usage instructions and photos.10. 8milelake 5pc Blind Inner Internal Bearing Puller Slide Hammer Set
Feature
Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm)One Slide Hammer Assemble & Clamp
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage The Parts
Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length
Description
2lb Slide Hammer (950grams)
Bearing Extractor Collets With Internal
Capacity From 3/8" (10mm) To 1-1/4" (32mm)
Drop Forged Steel
One Slide Hammer Assemble & Clamp .
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing
For Pulling Out Evenly Without Damage
The Parts Fully Chromed Carbon Steel
Slide Hammer, 15" (382mm)
Overall Length
Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm)
Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm)
Bearing Extractor 3: 5/8" to 1" (18mm-25mm)
Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm)
Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts
11. 8milelake 14PCS Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit, Heavy Duty
Feature
2 inches and 3 inches bearing separatorsDrop forged and heat treated.
Separator tools are used with bar puller and legs for a wide variety of pulling jobs.
The 5" puller cross-bar with a 6-1/4" forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools
Blow mold case for storage.
Description
Features:Separator tools are used with bar puller and legs for a wide variety of pulling jobs.
The 5" puller cross-bar with a 6-1/4" forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.
Kit included:
Drop Forged Construction;
Two Most Popular Bearing separator jaws( Splitters) - 2" & 3"
Extension Legs - 4" & 5"
Hex Push Puller Legs - 4 sets
Yoke center adapter - 6"
Puller Head Bar A-Type with a 9/16" Forcing Screw.
12. Ztech 14PCS Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit, Heavy Duty
Feature
APPLICABLETo remove gears, pulleys, bearings, steering wheels, etc.INCLUDING2" and 3" size separators, 5" puller cross-bar, 6-1/4" lead screw, etc.
VERSATILESeparator tools are used with bar puller and legs for a wide variety of pulling jobs.The 5" puller cross-bar with a 6-1/4" forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.
MATERIALDrop forged and heat treated steel.
EASY STORAGEComes in a blow molded case for safe & easy transport and storage, size:13.6''Lx10.6''Wx3''H.
Description
Features:Including:
- Two Bearing separator jaws (Splitters) - 2" & 3"
- Extension Legs: 5" - 4pcs
- Extension Legs: 4" - 4pcs
- Yoke center adapter: 6" - 1pcs
- Puller Head Bar: 6.9" - 1pcs
- Hooks: 2pcs
- Forcing screws
13. WORKPRO 3-Piece Gear Puller Set 3-inch, 4-inch and 6-inch
Feature
High-strength forged and hardened steel jaw arms for durabilitySet Includes: 1*3 in. 3-Jaw Gear Puller, 1*4 in. 3-Jaw Gear Puller, 1* 6 in. 3-Jaw Gear Puller
Use for a variety of pulling jobs in the shop or home, remove gears, pulleys and collars from shafts
Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
Meets and exceeds ANSI specifications for added safety