Finding your suitable ditra underlayment is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best ditra underlayment including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. DITRA HEAT UNCOUPLING MEMBRANE - DH5MA- SCHLUTER
Feature
3' 3" x 2' 7" Overall DimensionsHeating Membrane
Covers 8.6 Square Ft
Description
DITRA-HEAT is the only electric floor warming system that directly incorporates uncoupling technology to ensure that floors aren't susceptible to cracked tiles and grout. Cables can be placed wherever heat is desired for customized heating zones, and no leveling compounds are required, which makes for a quick and easy installation. With the proven technology of our DITRA uncoupling membrane incorporated in the design.2. SCHLUTER DITRA TROWEL - 11/64 X 11/64 SQUARE NOTCH
Feature
For DITRA use the DITRA trowel, which features an 11/64" x 11/64" (4.5 mm x 4.5 mm) square-notched design, is recommended.It is good practice to periodically lift a corner of the membrane after embedding it in the thin-set mortar to check the fleece for full coverage.
DITRA-TROWEL features a 11/64" x 11/64" (4.5 mm x 4.5 mm) square notch
Description
DITRA-TROWEL features a 11/64" x 11/64" (4.5 mm x 4.5 mm) square notch. For DITRA use the DITRA trowel, which features an 11/64" x 11/64" (4.5 mm x 4.5 mm) square-notched design, is recommended.3. DITRA-HEAT-TB Insulation Membrane Roll 108 sqft, 3'3" x 33'
Feature
Only electric floor warming system with integrated thermal breakWarms tiled floors up to 70% faster over concrete substrates
Saves energy by directing heat to the tile, not to the subfloor
Thinner assembly: heating, uncoupling, and thermal break in one single layer
All-in-one system means faster and simpler installation
Description
Schluter-DITRA-HEAT-TB is the only electric floor warming system with an integrated thermal break, and is ideal for tiled floors over concrete. The thermal break directs heat up into the tile rather than down into the subfloor, resulting in tiled floors that warm up to 70% faster over concrete substrates. By preventing the loss of heat to the subfloor, DITRA-HEAT-TB provides considerable energy savings and complete comfort even with tiled floors that are traditionally cold when installed over concrete. DITRA-HEAT-TB ensures a thin, quick, and simple assembly by providing heating, uncoupling, and a thermal break in one single layer. DITRA-HEAT-TB also offers the same four functions as the original DITRA: uncoupling, waterproofing, vapor management, and load support to ensure a long-lasting tile installation.4. Schluter Systems Kereck/fi 2 Kerdi Inside Waterproofing Corner, 4 Mil Thickness, Pack of 2
Feature
Schluter KERDI-KERECK-F - 4 mil Thickness - Inside Waterproofing Corner - Qty: 2Description
Schluter-KERDI-KERECK-F is a pliable waterproofing membrane strip designed to waterproof corners in bath and shower installations. It is covered in an anchoring fleece on both sides, allowing it to be set in place with thin-set mortar. Product Features Vapor Retardant The Schluter-KERDI waterproofing membrane has a very low water vapor permeance, making it an excellent waterproofing membrane for shower, bath, and steam room installations. Shaped to Corners The Schluter-KERDI-KERECK-F waterproofing membrane fits seamlessly into corners, eliminating the need to cut standard KERDI membrane to fit tedious areas.5. Schluter Ditra 1/8" Underlayment 323sqft
Feature
Covers 323 Square FeetDescription
Designed specifically for ceramic tile and dimension stone installations, Schluter-DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, DITRA performs all these functions while still providing adequate support/load distribution for the tile covering.6. Schluter-Ditra XL 5/16" Underlayment 175sqft Roll by Schluter
Feature
DITRA XL Uncoupling Membrane 3' 3" x 53' 3" = 175 sq ftEliminates the major cause of cracking and delaminating of tiled surfaces
Features a grid structure of square cutback cavities and an anchoring fleece laminated to the underside
Provides uncoupling, waterproofing, vapor management and heavy load distribution to ensure the durability and integrity of tile installations
DITRA-XL is 5/16" thick, which permits even transitions between tile and 3/4" thick hardwood flooring
Description
DITRA XL Uncoupling Membrane 3-ft 3-in x 53-ft 3-in = 175 sq ft DITRA-XL is a polyethylene uncoupling membrane which effectively neutralizes movement stresses between the substrate and the tile in challenging installations Eliminates the major cause of cracking and delaminating of tiled surfaces Features a grid structure of square cutback cavities and an anchoring fleece laminated to the underside Features an open rib structure, which allows for in-plane movement Provides uncoupling, waterproofing, vapor management and heavy load distribution to ensure the durability and integrity of tile installations Installs over single-layer plywood/OSB subfloors on joists spaced up to 24-in on center DITRA-XL is 5/16-in thick, which permits even transitions between tile and 3/4-in thick hardwood flooring Measures 3-ft 3-in x 53-ft 3-in7. DITRA HEAT UNCOUPLING MEMBRANE - DH512M- SCHLUTER
Feature
Makes installation of a long lasting calming floor heat system under tile or stone quick and easyCan be cut to fit your space and is ready to accept floor heating cable (sold separately)
Heating zones are easily customizable using loose cable into the studs no need for clips/fasteners
Provides uncoupling, waterproofing, vapor management, and support to your floor heating install
Nominal 1/4" thickness, self-leveling compounds are not required
Description
The DITRA-HEAT Uncoupling Membrane makes installing electric radiant floor heating cables quick and easy while providing the same neutralization of movement stress between tile and substrate that the standard DITRA Uncoupling Membrane does.
These thin 1/4" mats are designed with a stud structure that allows heating cables to fit snuggly into, ensuring a quicker installation and lower profile than when installing traditional DITRA Uncoupling Membranes over floor heating mats cables. Simply install your cable of choice between the studs of the mat at the desired spacing per the manufacturer's instructions, then thin-set and tile over the membrane.8. Laticrete Strata_Mat
Feature
Laticrete Globally Proven Construction SolutionsDescription
STRATA_MAT is a next generation high performance uncoupling membrane for use under ceramic tile and stone installations, for both residential and commercial applications. Designed to replace traditional underlayment materials. The unique patent pending design of STRATA_MAT provides for an enhanced mechanical bond of the adhesive mortar and provides for faster drying of the mortar, allowing for shorter time to grout. Specifically designed for use with both modified and unmodified mortars, STRATA_MAT allows for the proper adhesive mortar to be used with porcelain or large format tiles and stone.9. SCHLUTER DITRA 1/8" UNDERLAYMENT 150 SQ FT ROLL
Feature
3' 3" x 45' 9" Ditra Uncoupling MembraneExclusively designed for ceramic and stone tile
Waterproofs and allows moisture in the substrate to evaporate
Replaces backerboard or a second layer of plywood
1/8" thick makes transitioning to other surfaces simple
Description
This universal underlayment specifically designed for ceramic and stone tile eliminates the main cause of cracking in your tile installation. Tile and stone are rigid materials and are, therefore, sensitive to stresses originating in the sub floor. This uncoupling membrane allows independent movement between the sub floor and the finished surface, thereby neutralizing these stresses. Exclusively designed for ceramic and stone tile Waterproofs and allows moisture in the substrate to evaporate Replaces backerboard or a second layer of plywood 1/8 in. thick makes transitioning to other surfaces simple Ideal for interior and exterior tile and stone installations Easy to install10. SCHLUTER KERDI-BAND - 5" X 33'
Description
Schluter-KERDI-BAND is a pliable waterproofing membrane strip designed to waterproof butt joints and floor-to-wall connections in bath and shower installations. Its sheet form allows it to be molded and cut to any imaginable shape, making waterproofing of even the most elaborately shaped shower a simple task. It is covered in an anchoring fleece on both sides, allowing it to be set in place with thin-set mortar. Product Features Vapor Retardant The Schluter-KERDI waterproofing membrane has a very low water vapor permeance, making it an excellent waterproofing membrane for shower, bath, and steam room installations. Pliable to Any Shape Schluter-KERDI waterproofing membranes can be cut and bent to fit any shower shape, making it a universal shower waterproofing tool.11. Schluter Ditra 1/8" Underlayment 54sqft
Feature
54sq ft roll1/8" - 3 mm
Description
Ceramic and stone tiles are durable, easy to maintain, and hygienic, representing the ideal surface coverings. However, today's lightweight construction methods can make the installation of hard surface coverings particularly challenging. In order to protect the integrity of the tile assembly, an underlayment that performs multiple functions is required. Schluter-DITRA is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside. Schluter-DITRA is bonded to the substrate using thin-set mortar. The anchoring fleece on the underside of Schluter-DITRA is fully engaged in the mortar to provide a mechanical bond to the substrate. Tile is installed over Schluter-DITRA using the thin-bed method in such a way that the mortar becomes mechanically anchored in the square, cutback cavities of the Schluter-DITRA matting. Designed specifically for ceramic tile and dimension stone installations, Schluter-DITRA serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, DITRA performs all these functions while still providing adequate support/load distribution for the tile covering. a) Uncoupling Tile has been successfully installed for thousands of years by incorporating an uncoupling layer, or forgiving shear interface, within the tile assembly. Schluter-DITRA provides uncoupling through its open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. b) Waterproofing Schluter-DITRA provides reliable waterproofing in interior and exterior applications. Its polyethylene composition protects the substrate from moisture penetration. c) Vapor management d) Support / load distribution12. Schluter Kerdi 108 Sq Ft Waterproofing Membrane
Feature
Roll dimensions are 3' 3" x 33'KERDI is a pliable sheet-applied polyethylene waterproofing membrane and vapor retarder
Eliminates water damage which can lead to mold and mildew
Features an anchoring fleece on both sides to anchor the membrane in thin-set mortar
Ideal for waterproofing in conjunction with tiled surfaces on walls and floors
Description
Kerdi is a sheet-applied polyethylene waterproofing membrane and vapor retarder. Kerdi200/10M covers 108 sq. ft. and is ideal for waterproofing tiled tub surrounds and showers. This membrane features an anchoring fleece on both sides to anchor it in thin-set mortar. Kerdi eliminates water damage which can lead to mold and mildew. Roll dimensions are 3 ft. 3 in. x 33 ft. For commercial and residential use Installs easily with unmodified thin-set mortar (sold separately) Waterproofing for tiled shower walls and floors Covers 108 sq. ft.13. Ditra heat kit system-DHEK12056- SCHLUTER
Description
Ever wish that the tile in your bathroom didn't freeze your feet as soon as you step on it after a hot shower? Enter Schluter-DITRA-HEAT, a brand new offering from Schluter that aims to make your bathroom one step closer to perfect. Schluter-DITRA uncoupling membranes already keep your tile safe from unnecessary breakage - DITRA-HEAT takes this one step further and adds a radiant floor warming system to the layer beneath your tile. This all inclusive kit includes the under-tile membranes, heating wire, and thermostat you will need to install the heating system. All that's left is the tile of your choosing! Product Features Tile Uncoupling Membrane Schluter-DITRA-HEAT membranes carry over all the functionality of Schluter-DITRA uncoupling membranes. The membrane functions as a flexible layer between your tile and the rigid subfloor underneath it, significantly reducing tile breakage and eliminating grout problems.14. Permat Ceramic Tile Underlayment Sheets
Feature
1/8" thickNo extended cure time for latex modified thinset mortars under porcelain tile
Crack isolation properties (uncoupling)
Permanent Support of high quality floorings - ex: stone, marble
Reduces vertical subfloor movement (deflection)
Description
The Blanke PERMAT is an innovative uncoupling tile underlayment that offers all the labor saving benefits of the old plastic tile underlayment roll systems. The Blanke PERMAT also adds support to wood substrates thereby reducing deflection and provides greater compression and tensile strength than plastic tile underlayment roll products. The Blanke PERMAT is stable to walk on during installation and does not require additional curing time when installing porcelain with latex modified thinset. Strengthens wood substrates, Superior compressive strength, Lightweight; easy to install, 1 sheet is 6.5 sq ft. Each sheet of Permat is 2' x 3' 2". Price listed is per sheet.15. Schluter Kerdi - 54 SQ FT
Feature
3' 3" x 16' 5" = 54 ft2Membrane thickness: 8 mil
Description
Schluter-KERDI is a bonded waterproof membrane with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to anchor the membrane in the thin-set mortar. Schluter-KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings. Tiles can be installed directly on Schluter-KERDI using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used. Pre-cut sections of Schluter-KERDI are available for inside and outside corners, as well as for pipe collars. Use Schluter-KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints. Schluter-KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.16. Schluter Ditra XL Membrane 10 Square Foot 5/16" Underlayment Prevent Tile Cracks