Finding your suitable mold release is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best mold release including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. MG Chemicals 8329-350G Non-Silicone Epoxy Mold Release, 12.3 oz Aerosol
Feature
Epoxy mold releaseNon-Silicone
It allows for a clean removal of the cured epoxy
For use with all types of epoxies and phenolic resins
Description
Epoxy mold release apply to a surface before pouring in encapsulating and potting compound. It allows for a clean removal of the cured epoxy. For use with all types of epoxies and phenolic resins. RoHS compliant.2. CRC Food Grade Mold Release, 11.5 oz Aerosol Can, Clear
Feature
Silicone free formula is perfect for medical and food packaging aplicationsThe pure white oil based formula makes it an excellent all-purpose mold release
Fast drying and paintable
Non-flammable
Safe for use on most plastics
Meets FDA regulation 21 CFR 172.878
Description
CRC food grade mold release WO is a non-silicone, paintable mold release that is specially formulated for use in the molding of packaging and plastics used in medical and food industries. This highly refined white mineral oil based formula is colorless, odorless, non-staining and non-corrosive. CRC food grade mold release WO is a solvent-free formula that provides maximum plastic compatibility. Food grade formula makes this a perfect release agent for medical and food packaging applications non-silicone, paintable fast drying for quick cycles colorless, odorless, non-staining, non-corrosive. Excellent all-purpose release meets FDA regulation 21 CFR 172.878 (white mineral oil). Applications includes use with all thermoplastic resins, polyolefins, polycarbonates, rubber and some epoxies. Ideal for medical and food applications.3. Mann Release Technologies Ease Release 200 14 fl. oz.
Feature
Mann Ease Release 200 Aerosol Clear Mold Release SprayWill release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers
Excellent release. Effective on urethane, silicone and metal molds.
Easy to Apply. Fast Drying.
Effective over a broad temperature range from 70F to 500F
Description
Ease Release 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers. Ease release 200 is effective on aluminum, chrome, platinum silicone, epoxy, rubber and steel molds.Ease Release 200 is easy to apply, fast drying and effective over a broad temperature range from 70F to 500F.4. Smooth-On Universal Mold Release 14 fl. oz.
Feature
Formulated especially for mold making and casting, Universal Mold Release works well with most urethane liquid rubber and liquid plastic products.Universal Mold Release improves molding efficiency for a variety of casting applications and will lengthen the life of your production mold.
It will release mold rubbers from properly prepared models and easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds.
Using a silicone rubber mold without release agent limits the production life. Universal mold release will more than double the production life of the mold if you are casting urethane resin.
If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold.
Description
If you've ever been to the movies, admired a piece of sculpture, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, plastics, foams and other products to turn their ideas into 3-dimensional reality.Universal Mold Release Agent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Smooth-On SuperSeal or other sealer may be necessary.
Universal Mold Release is effective over a broad temperature range from 70F to 500F.
Features
If using silicone rubber, seal model surface with SuperSeal only. Do not use Universal Mold Release. Universal Mold Release also easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. This product has a limited shelf life and should be used as soon as possible. Properly used, Universal Mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold.
5. Meguiar's M8 Maximum Mold Release Wax - 11 oz.
Feature
A blend of imported waxes specifically formulated to provide the maximum number of releases per application.For fiberglass applications.
Especially useful on tooling and new molds.
Description
Meguiar's Max Mold Release Wax is a special blend of imported waxes specifically formulated to provide the maximum number of releases per application. For fiberglass applications. Especially useful on tooling and new molds.6. CRC 03300 Silicone Mold Release Spray, (Net Fill Weight 12 oz) 16oz Aerosol can.
Feature
Used for a variety of applications including injection molding, compression molding, blow molding, and extrudingMultiple part releases per application
Ideal for hot or cold molds
Medium duty silicone content of 3.5 percent
Non-staining, non-corrosive and fast drying
Effective temperature range 35F to 600F
Description
CRC General Purpose Silicone Mold Release is suitable for most applications where post-mold painting is not required. This product has a medium duty silicone content (3-1/2 percent) and is a rapid dry, anti-stick mold release agent suitable for cold and hot molds. CRC General Purpose Silicone Mold Release prevents sticking, which increases the life of dies and molds, improves product surface finishes and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, epoxy resins, HDPE, Noryl, nylon, Polyproplyene, polysulfone, and wax. Also for use in blow molding, extruders, foundries and investment castings. Prevents Sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid Dry, anti-stick mold release agent suitable for cold and hot molds. Effective Temperature Range of 35 to 600 degrees F. 3-1/2 percent Solids provide excellent general-purpose lubrication. Low Odor, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact). Meets 1998 USDA Guidelines for use in meat and poultry plants.7. Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear
Feature
Ideal for polypropylene or rubber moldsIs low odor
Solvent-free
One-to-one ratio
Eight-ounce kit
Description
Easycast is an easy to use 1-to-1 ratio, two-component, clear casting epoxy. It is ideal for casting small decorative items such as jewelry, figurines, paperweights, coasters, knobs and more. Embedding or encasing items is easy and fun. Color easycast with casting' craft transparent dyes for the colored glass look or opaque pigments for solid colors.8. Partall Paste #2 1-1/2 lb Tub
Feature
The original green wax, paste wax mold release compound, silicone free.There is no better protection for new or green molds.
9. Fiberglass Evercoat Mold Release Agent, 8-Ounce
Feature
Evercoat105685
Auto & Boating
Description
Since 1953, Evercoat has made a promise to bring only the highest quality products to the marine industry. These high quality products to the marine industry. These high quality products make the maintenance and repair of your boat better and easier than ever before. Polyvinyl Alcohol (PVA) is for use as a curing agent for Gel-Kote and other air inhibited polyester resins. Spray a light mist over the catalyzed Gel-Kote to fully cure the Gel-Kote resin and eliminate the tacky feel. Also an excellent mold release agent.10. Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Feature
MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessarySHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see "For Best Results" section below
LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax
Description
Use this silicone mold making rubber for making perfect reproductions of original models. It captures intricate detail and is easy to use. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time. For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Net weight 16 oz. (454 Grams). Technical information mixing ratio: one to one by volume (100a:130b by weight) pot life: 30 min. Demold: 6 hrs. Color: lavender properties (part aand b mixed) viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6 Tensile strength: 240 psi elongation at break: 250% die c tear strength: 40 pli compression set: 37% shrinkage:.0025 In./In. For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room temperature before use.11. Environmental Technology 33900 Mold Release and Conditioner, 4 Ounce
Feature
Solvent FreeOdorless
Convenient pump spray
Use with easycast casting epoxy and castin' craft casting resin
Extends the life of your molds
Description
Castin' Craft Mold Release/Conditioner is used to release molds when casting with Castin' Craft Polyester Casting Resin or EasyCast Clear Casting Epoxy. We recommend Mold Release/Conditioner as a release agent and to clean, condition and extend the life of your molds.12. CRC Lecithin Mold Release, 12 oz Aerosol Can, Clear
Feature
No special cleaning before part decorationColorless, odorless, non-staining and non-corrosive
Meets FDA regulation 21 CFR 175.300 (release agent)
Long lasting mold release for fast, easy part removal
Provides smooth, dry, non-toxic film
Non-silicone, vegetable-based
Description
CRC Lecithin Mold Release is suitable for most applications where post-mold parts will be painted, stenciled, glued, bonded, laminated, hot-stamped or metalized. This product is a food-approved, vegetable based, non-silicone mold release. The rapid dry, anti-stick formula is suitable for cold and hot molds. CRC Lecithin Mold Release prevents sticking, which increases the life of dies and molds, improves product surface finishes and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, nylon, polycarbonate, polyethylene, polypropylene, polystyrene, polysulfone, and rubber. Also for use on plastic wrap equipment, gaskets and seals. Prevents sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid dry, anti-stick mold release agent suitable for cold and hot molds. Vegetable-based Lecithin is a non-silicone, food approved release. Completely Compatible with secondary operations where parts must be painted, stenciled, glued, bonded, laminated, hot stamped or metalized. (No special cleaning required before part decoration.) 3-1/2 percent Solids provide excellent general purpose lubrication up to 500 degrees F. Colorless, Odorless, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent). Meets 1998 USDA Guidelines for use in meat and poultry plants.13. Environmental Technology 5-1/4-Ounce Castin' Craft Resin Craft Surface Coat Spray
Feature
5-3/4-Ounce aerosol canFast drying
Easy to apply
Excellent sealer
High gloss finish
Description
Castin' Craft Resin Spray is a fast drying, clear gloss finish/sealer. It is ideal for fixing small blemishes in cured resin pieces.14. CRC Heavy Duty Silicone Mold Release, 12 oz Aerosol Can, Clear
Feature
Efficient, economical and effective for faster moldingColorless, odorless, non-staining and non-corrosive
Helps avoid mold build-up
Effective temperature range up to 600 degrees F
Heavy duty silicone content of 5 percent
Meets FDA Regulation 21 CFR 175.300 (release agent)
Description
CRC heavy duty silicone mold release provides superior lubrication and allows the user to maximize their releases even in severe molding conditions. This product has a heavy-duty silicone content (5 percent) and is a rapid dry, anti-stick mold release agent suitable for cold and hot molds. CRC heavy duty silicone mold release prevents sticking, which increases the life of dies and molds, improves product surface finishes, and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, Noryl, nylon, polycarbonate, polystyrene, polysulfone, rubber and wax. Also for use in blow molding, extruders, foundries and investment castings. Prevents sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid dry, anti-stick mold release agent suitable for cold and hot molds. High quality Silicone yields more cycles per can - provides maximum efficiency and economy for faster molding, fewer rejects and more production. Effective temperature range up to 600 degrees F. 5 percent Solids provide superior lubrication even in severe molding conditions. Colorless, odorless, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact). Meets 1998 USDA Guidelines for use in meat and poultry plants. Less than -50 degrees F freezing point.15. 2 PACK Smooth-On Universal Mold Release 14 Fluid Oz
Feature
Smooth-On Universal Mold Release 14 Fluid Oz / Net weight 12 oz. /341 grams.Size: 2 Pack - Includes 2 cans of Universal Mold Release 14 oz
It releases casting materials from properly prepared rubber, plastic, and metal molds.
Lengthens production life of rubber molds