Finding your suitable replicator mini is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best replicator mini including detail information and customer reviews. Let’s find out which is your favorite one.
Reviews
1. MakerBot Build Plate Tape, Replicator Mini (Pack of 10)
Feature
Comes in packages of 10 sheetsSurface area of 10.0 L X 10.0 W cm [3.9 L X 3.9 W in], perfect for covering your build plate
Single sheets make it easy to apply and remove tape from the build plate
Medium adhesion makes Build Plate Tape easy to remove
Description
Build Plate Tape for MakerBot Replicator Mini Compact 3D Printer makes it even easier to neatly remove 3D prints from your build plate.2. Micro-Swiss HW-NOZ-MK10-04 Plated Brass Wear Resistant Nozzles , 1.75 mm, MK10 (Flash Forge/Dremel/Wanhao) 0.4 mm, Bright Nickel
Feature
USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
Description
Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.
Currently available in:
1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.
4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking...long story) - 1.75mm filament only.
5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.
Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.
Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.
contact Proto-pasta for more information.
3. MakerBot Replicator Mini+
Feature
Print bigger models up to 4" by 5" by 5"-28 percent larger than the MakerBot Replicator mini10 percent faster print time than the MakerBot Replicator mini compact 3D printer
The redesigned z-stage and refined gantry improve precision and reliability through stiffer materials and sturdier construction
To ensure consistent performance, our new 3D printers and their subsystems were re-engineered and rigorously tested for over 380,000 hours across multiple facilities
With the new grip surface, prints adhere better, resulting in reduced warping and curling. No more Blue tape. The built Plate is also factory-level so the printer is ready to go Right out of the box
Please note that Amazon is the only authorized seller of MakerBot products on Amazon.com. Products purchased from third parties on Amazon.com may not be factory new and are not covered by any MakerBot warranty.
Description
The MakerBot Replicator mini+ is engineered and tested for simple, accessible, and reliable desktop 3D printing. Print faster, easier, and more reliably with a bigger build volume. Combined with makerbots guided Wireless setup and connected workflow tools, the Replicator mini+ makes desktop 3D printing streamlined, portable, and simple-to-integrate. To ensure higher performance, the MakerBot Replicator mini+ features improved filament routing, a redesigned z-stage, a refined gantry, a 28 percent bigger build volume, better print adhesion, and more. Optimized to print with makerbots PLA filament, it also includes all the standard features for ease of use and accessibility from the previous model.4. MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Black
Feature
The best and most consistent PLA filament for your MakerBot 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Compatible with the MakerBot Replicator 2, MakerBot Replicator (Fifth Generation), MakerBot Replicator Z18.
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 9 in
Spool Width: 2 in
Spool Hub Hole: 2 in
Diameter 1.75 mm
Net Weight: 2 lbs.
5. MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Black
Feature
The best and most consistent PLA filament for your MakerBot Replicator 3D PrinterComprehensively quality tested at both 100-micron and 200-micron layer resolutions
Guaranteed to have no heavy metals, phthalates, or BPA
Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer
Description
MakerBot Filament is the best and most consistent filament for MakerBot Replicator 3D Printers.
MakerBot PLA Filament is a bioplastic made from corn. All its dyes are FDA-approved as food safe and it is guaranteed to have no heavy metals, phthalates, or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer.
If you are new to 3D printing, MakerBot PLA Filament is a good material to start with because it is easy to use and performs well on most prints.
Optimized for the MakerBot Replicator Mini. Also compatible with the MakerBot Replicator 2 and MakerBot Replicator (Fifth Generation).
Glass Temp: 60-65 C (140-149 F)
Melting Temp: 150-160 C (302-320 F)
Nozzle Temp: 230 C (446 F)
Spool Diameter: 5.9 in
Spool Width: 1.6 in
Spool Hub Hole: 2 in
Filament Diameter 1.75 mm
Net Weight: 0.5 lbs.
6. MakerBot Smart Extruder +
Feature
Engineered with improved components for better print performanceExperience a seamless workflow from start of a print to completion
Backed by an extensive Quality Assurance (QA) operation and technical support team to ensure your success
Based on our testing, it prints for over 700 hours; This number is the equivalent of the following: 7 large spools of MakerBot PLA filament 2,310 meters of filament 1.44 miles of filament
Description
The MakerBot Smart Extruder+ is designed to provide dependable, consistent performance with superior results using MakerBot PLA filament. Inside, improved components and an enhanced sensor system ensure that your printing process is smooth and reliable from start to finish. Beyond these innovations, easy swapping means you can remove and replace the extruder while minimizing downtime. Easy to use, this extruder ensures greater print success over time. Double the warranty of its predecessor, the Smart Extruder+ is a culmination of 160,000 hours of rigorous testing and product design that sets a new benchmark in 3D printing. Compatible with the MakerBot Replicator Desktop 3D Printer and the MakerBot Replicator Mini Compact 3D PrinterKey Features & Benefits Engineered with improved components for better print performance Experience a seamless workflow from start of a print to completion Backed by an extensive Quality Assurance (QA) operation and technical support team to ensure your success Double that of its predecessor Based on our testing, it prints for over 700 hours. This number is the equivalent of the following: 7 large spools of MakerBot PLA filament 2,310 meters of filament 1.44 miles of filament Extended PTFE Tube for a drastic reduction in clogging A modular design allows users to remove and replace the extruder with ease Faster print start up and easier leveling Reduce downtime by replacing a worn Smart Extruder+ without losing a print An enhanced sensor system communicates with MakerBot Desktop and MakerBot Mobile to keep you informed Jam detection pauses the printer, allowing for print recovery The z-homing and leveling sensors enable accurate and reliable build plate leveling.7. MakerBot Replicator Mini Compact 3D Printer, Firmware Version 1.7+
Feature
Easy, affordable and portable 3D printingTransforms a small desk in your home or classroom into an exciting learning center
Educate students how to think, imagine, create, craft and print in 3D, while preparing them for the jobs of the future
Creates opportunities for students to bond with parents, siblings, classmates, and teachers
Compatible with the new MakerBot Smart Extruder+
Description
MakerBot Replicator Mini Compact 3D Printer8. MakerBot Smart Extruder, Replicator Mini
Feature
Easy to swapDetects filament absence and automatically pauses your print
Sends notifications to MakerBot Desktop and MakerBot Mobile apps
Description
The modular, swappable Smart Extruder minimizes downtime and prepares you to quickly adapt to future innovations in the fast-evolving world of 3D printing. Replacing a worn extruder with a backup couldnt be easier and you dont need any special tools. Powerful magnets snap it into place in seconds, letting you quickly resume printing when a replacement is needed. This swap-ability also allows you to adapt your 3D printer to future innovations (like new filament materials) without having to purchase a new printer.9. MakerBot MP07022 Makercare Preferred Protection Plan for Replicator Mini+ - 3 Year
Feature
Contact MakerBot support via the web and we'll respond same day if before 4PM est. If after 4PM est, one business day response timeGet support the way you want it: REACH a support expert by phone, live chat, or email, or access our easy-to-use Online support pages
For the duration of your plan, MakerBot will replace defective parts or arrange for you to ship your MakerBot product back to the factory for repair. Returns require authorization by MakerBot support
Description
The MakerBot MakerCare preferred protection plan is the fastest, most comprehensive level of support from the people who know your MakerBot product best.10. MakerBot 112032-00 Replicator Mini + Build Plate Kit
Feature
Compatible with the replicator mini+, this kits includes a sturdy built plate that can be used a backup, replacement, or spareAttached on top of it is the grip surface for better adhesion when printing as well as reduced warping and curling. Printed with confidence
It also includes the grip build surface for better adhesion when printing as well as reduced warping and curling
Description
MakerBot Replicator mini+ build plate Kit** compatible with the Replicator mini+ this Kit includes a sturdy built plate that can be used a backup, replacement, or Spare.11. MakerBot MP07021 Makercare Preferred Protection Plan for Replicator Mini+ - 2 Year
Feature
Contact MakerBot support via the web and we'll respond same day if before 4PM est. If after 4PM est, one business day response timeGet support the way you want it: REACH a support expert by phone, live chat, or email, or access our easy-to-use Online support pages
For the duration of your plan, MakerBot will replace defective parts or arrange for you to ship your MakerBot product back to the factory for repair. Returns require authorization by MakerBot support