If you looking for tubing clamp then you are right place. We are searching for the best tubing clamp on the market and analyze these products to provide you the best choice.
Reviews
1. Bel-Art Plastic Jaw Style Tubing Clamps for Tubing up to in. O.D. (Pack of 12) (F18218-0000)
Feature
Serrated jawsStrong acetal plastic clamp provides secure closure on tubing with a wall of 0.82mm (1?32") or thinner
Slides over tubing at any point for easy installation and may be left open for convenient storage without constricting flow
It locks when closed and springs open when the locking tab is released
Jaws are 2.7cm (11?16") long; total length is 5.9cm (25?16") long
Description
Set-up securely holds as many as eight chromatography columns up to 30mm (1 3/16") in diameter. The rack can be wall-mounted or be placed on two support stand rods. With a support stand, the height of the rack can be adjusted sliding into place and then tightening with screws. Chromatography columns are held in or between flexible loops secured to the plastic backing of the rack. Rack measures 31.1 x 6.4cm (12 1/4 x 2 1/2") Sold per each.2. Bel-Art F18212-0000 Screw Style Tubing Clamps for Tubing up to in. O.D. (Pack of 3)
Feature
Accepts tubing up to 14mm (1/2") ODAutoclavable at 121degreeC (250degreeF) Resistant to acids, alkalis, and organic solvents
Add flow control in-line without disconnecting tubing or disturbing your operation
On/off and fine flow control may replace stopcocks in some applications
Description
Delrin resists weak acids, bases, and organic solvents. Controls flow in flexible tubing up to 1/2 inch (13 mm) OD. Replaces stopcocks in many applications. Install without disconnecting tubing. Autoclavable. Bel-art.3. Oetiker 3/4-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes, 50-pack
Feature
3/4-Inch stainless steel cinch clamps with PEXGrip TechnologyConnect PEX to crimp type fittings in hard to reach spaces
Just Pinch the tab closed with a PEX tool to make the connection
Interlocking ring that forms a complete 360-Degree watertight seal around PEX Tubing
Made in The USA - ASTM F877/F2098
Description
Oetiker QSOET crimp ring is made of stainless steel for enhanced durability. Ring has a nominal size of 3/4 inch and is suitable for hot as well as cold water plumbing applications. Crimp ring has PEX end style for precise operation. Ring with 0.031 Inch wall thickness has 0.917 Inch ID for convectors. PEX cinch clamps are used for connecting PEX tubing to brass or poly fittings, especially in hard-to-reach spaces. Stainless steel cinch clamps feature an easy-to-use tab design, so there is no need to get a tool around the entire fitting. Simply press the tab closed with a cinch tool and the connection is complete. The cinch clamp design provides a positive mechanical connection, ensuring the PEX tubing is evenly compressed against the full circumference of the fitting. This is a pack of 50 rings.4. 1 X Small Shut Off Hose Clamp
Feature
Siphon hose shut off clampAdjusts rate of flow with great precision
Very convenient
5/16" or 3/8" tubing
Description
This siphon hose shut off clamp for 5/16" or 3/8" tubing has a 15 position controlled ratchet that will adjust the rate of flow through a vinyl hose with great precision. Or, stop the flow altogether. Adjustment can all be done with one hand. Very convenient.5. Bel-Art Maxi Plastic Tubing Clamps; For Tubing Under in. O.D. (Pack of 6) (F18229-0000)
Feature
12-position ratchet control from full open to complete closureWill not distort, rust, or corrode
For tubing up to 19mm (3/4") O.D
6 per bag
Description
Acetal Plastic Tubing Clamps will not distort, rust, or corrode. Maxi clamp has 12-position ratchet control from full open to complete closure. For tubing up to 19mm (3/4") O.D. 6 per bag.6. Pro Tie 33200 SAE Size 4 Range 1/4-Inch-5/8-Inch Mini All Stainless Hose Clamp, 10-Pack
Feature
Band, housing, and screw are all stainless steelSAE Size: 4
Low Range: 1/4-Inch
High Range: 5/8-Inch
Screw Size: 6 mm slotted hex head
Description
Pro Tie mini worm drive hose clamps are precision made from stainless steel to provide dependable and long lasting use. The 5/16-Inch wide band provides an excellent seal with a variety of hose materials and yet is small enough to fit into tight places. The slotted hex head bolt allows for multiple tools to tighten the clamp. All stainless steel construction provides superior corrosion resistance. Pro Tie hose clamps will work on a variety of applications from home use, auto repair, marine, plumbing, farm, ranch, and industrial.7. Fermtech 5478-6H Auto-Siphon Mini with 6 Feet of Tubing and Clamp
Feature
Perfect for small batchesStart your siphon with a single pump
Includes tubing and siphon clip
Glass jar not included
Description
The mini auto siphon is perfect for small batch home brewers, wine makers, kombucha, kefir, and other home made beverages. The Mini fits easily into 1 gallon containers. Includes 6 feet of siphon hose and the siphon clip.8. HealthAndYoga(TM) Enema Supplies - Enema Clamp
Feature
Flexible white virgin PVC pinch clamp. Can be pushed over most enema hose sizes.Easy for single hand operation - press to stop flow & release to start the flow
Very economical and competitive price
Description
This Plastic Enema clamp when used with the hose allows for easy shut-off of liquid flow. It has a Press Lock System making it very easy to control the flow of water at the press of a button.9. 5/16" Heavy Duty Double Gripping Nylon Hose Clamps, 225 F / 200 PSI Rated, 10 Pack (Made in USA/UK)
Feature
Resists pressures up to 200 PSI and above depending on clamp size and hose/fitting quality-40C to 125C/225F Long Term Operating Temp Range (up to 170C/340F Occasional Peak Temp)
For use with 5/16" OD Tubing/Hose. Made from UV/Heat Stabilized 6/6 Nylon. Easy to install and reusable.
Double Grip - Second row of teeth for a more secure grip than conventional nylon clamps
High chemical resistance inlcuding gasoline (with or without methanol), oils, and most solvents
Description
These double gripping clamps are ideal for use in automotive, electrical, marine, medical, agricultural, and many other applications. Nylon 6/6 material is UL 94 V2 self-extinguishing. Manufactured in the USA and UK. **** Specifications: Inner Diameter Fully Engaged (A): 0.31"/7.9mm, Inner Diameter with One Set of Teeth Engaged (B): 0.36"/9.2mm, Band Thickness (C): 0.062", Width (D): 0.187"10. SEOH Hoffman Tubing Clamp 0.36 inch (9mm) Brass
Feature
Nickel Plated BrassAccepts tubing up to 9mm
Description
Nickel Plated Brass, stout quality. Accepts tubing upto 0.36"(9mm). With hinged bottom bar for direct fitting and removal without accessing the ends of the tube. The screw does not protude from the bottom of the top bar, therfore there is no damage to the tube.11. GS Power Tube Clamp Brackets (choices of 1 / 1.25 / 1.5 / 1.75 / 2 / 3 inch ). Mount LED Light Bar Radio Antenna Safety Flag on Bar Rack Roll Cage Bumper on Can-Am Jeep RZR Teryx Boat ATV Bike (2 pc)
Feature
Full aluminum alloy construction that will never rustMount hole diameter: 10.5 mm. Can be easily enlarged by drilling. Drilled location will also never rust
Fits 1" Tubes, Bull bars or Roll Cages on Rhino, RZR, Teryx, CAN-AM, Jeep etc
Bracket Sold as a Pair (2 per Purchase)
12. Dernord Sanitary Spool Tube with Clamp Ends,Stainless Steel 304 Seamless Round Tubing With 1.5 inch Tri Clamp 50.5MM Ferrule Flange (Tube Length: 24 Inch / 610MM)
Feature
Sanitary Spool Tube fits Tri-clamp: 1.5", Ferrule OD: 50.5MMSanitary Spool Tube Length: 24 Inch ( 610mm ), Sanitary Spool Tube OD: 1.5 Inch
Round metal tubing for transport of fluids and gases in chloride environments
Made of Stainless Steel 304 material, Internal and External Polished, 100% suitable for sanitary purpose, seamless construction for smoother interior flow and greater burst strength than welded tubing,Annealed to restore formability for bending or flaring tubing
Metal tubing is used in HVAC and plumbing systems and for applications in the aerospace, automotive, chemical processing, food and beverage, manufacturing, and medical industries
Description
From the Manufacturer
This Dernord Sanitary spools which are made of stainless steel 304 are prefabricated lengths of tubing with Tri Clamp fitting ends added for convenience. When combined with other Tri Clamp fittings, clamps, and gaskets, sanitary spools can build a process line without the need for on-site welding and fabrication, and at a considerable time savings. Tri Clamp spools also have the added benefit of being less permanent than welded tubing, and can be easily disassembled, moved, or reassembled in a different configuration. The versatility and cost savings of prefabricated spool pipe make them a popular solution for piping needs.
Dernord Sanitary spools Features
Tube Length: 24 Inch ( 610MM )
Tube OD: 1.5 Inch
Tri-clamp size: 1.5 Inch
Ferrule OD: 50.5MM
Body material: Stainless Steel 304
13. SEOH Hoffman Tubing Clamp 1.37 inch(35mm) Nickel Plated Brass
Feature
Nickel Plated BrassAccepts tubing up to 35mm
Description
Nickel Plated Brass, stout quality. Accepts tubing upto 1.37"(35mm). With hinged bottom bar for direct fitting and removal without accessing the ends of the tube. The screw does not protude from the bottom of the top bar, therfore there is no damage to the tube.14. Large Shut Off Hose Clamp
Feature
1/2 Inch TubingSiphon Hose Clamp
Adjust Rate of Flow with Great Precision
Description
This 1/2 Inch Siphon Hose Shut Off Clamp has a 15 position controlled ratchet that will adjust the rate of flow through a vinyl hose with great precision. Or, stop the flow altogether. Adjustment can all be done with one hand. Very convenient.15. 5 Pack Siphon Hose Shut Off Clamp Small Plastic Clamp Fits 7/16 in O.d.tubing Plastic Tubing Mid-range Clamp
Feature
MADE IN USA Made of PlasticIf your hose is less than 1/2" OD (7/16" 3/8" 5/16", 1/4" etc) this clamp WILL FIT it!
Great for beer and wine makers use in siphoning, racking, and bottle filling.
Fits tubing from 3.2 to 11mm (1/8 to 7/16") O.D.
FREE SHIPPING
Description
TUBING CLAMP MEDIUM 1 POSITION SIPHON HOSE SHUT OFF PINCH VALVE BEER WINE KIT MADE IN USA medium size tubing clamp to instantly stop the flow of air or liquids through the type of vinyl hose typically used in homebrew applications. If your hose is less than 1/2" OD (7/16" 3/8" 5/16", 1/4" etc) this clamp WILL FIT it! Clamp slides onto a tube and can be placed anywhere along its length. The ratcheted closure allows this pinch-clamp to be quickly opened and closed which makes it very useful for siphoning beer, wine or cider. Great for beer and wine makers use in siphoning, racking, and bottle filling. These clamps will stop the flow in the hose completely. These clamps will work with 7/16" 3/8", 5/16" and 1/4" soft plastic hose. Quantity: 5 Condition: NEW Size Compatibility: Fits tubing with outside diameter of 3/8 inches (8mm) or less. Dimensions: Length: 1.5 inch (38mm) Height: 1.06 inch (27mm) Width: 0.69 inch (17.5mm) Features On/Off or flow control for use with air or liquid Eliminate contamination Reduce or stop flow by pinching the outside of tubing16. Nalgene 6165-0002 PP Tubing Pinch Clamp, For 1/4" to 7/16" Tubing OD (Pack of 12)
Feature
Tubing O.D. size: 1/4 to 7/16 inchMaterial: polypropylene
Ideal for use with laboratory tubing
Allows sure, one-handed regulation of fluid flow, from completely open, to restricted flow, to completely closed
Autoclavable; will not rust