If you looking for skill saw edge guide then you are right place. We are searching for the best skill saw edge guide on the market and analyze these products to provide you the best choice.
Reviews
1. Kreg KMA2685 Circular Saw Guide
Feature
Make rip cuts and crosscuts up to 24" wideCut multiple pieces to the same size with just one setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring, and layout lines
Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOLGreat projects start with high-quality cuts, and you can make those cutsmore easily than you ever imaginedusing your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantup to 24"using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you dont have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sledit accepts most left-blade or right-blade sawsand then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youll get straight, accurate, repeatable cuts easily every time.
2. DEWALT DW3278 Circular Saw Rip Fence
Feature
Rip fence for use with most DEWALT circular sawsProvides smooth, precise results
simple to fasten and designate distance from blade to fence
Easy attaching by inserting through slots at front of shoe and tightening screw
Ruggedly crafted from all metal for long life
Description
For accurate ripping without penciling problems. For use with all DeWalt circular saws.3. E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
Feature
STRAIGHT EDGE - E. Emerson's Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle.NO C-CLAMPING - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.
EXTRA WIDE - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction free cuts.
FLAT TOP - The extra low profile and flat top makes it easier for all circular saw or router straight cuts.
CONTRACTOR SERIES - Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories.
Description
The Contractor C50 50in. All-In-One Clamp is a contractor-grade straight edge clamp used primarily as a guide for making straight cuts with circular saws and routers. It is both rigid and light, making it quick to position and lock in place. The aluminum frame is lightweight for ease of use but also designed for durability. The clamping components are of resilient Zytel nylon, which includes 9% glass content. The Contractor C50 straight edge clamp is one of the most valuable and useful tools in the workshop or work truck. Common Usage: Guide for making straight cuts w/circular saws and routers, Dimensions L x W x H (in.): 60 x 2 5/8 x 1 1/4, Includes: (1) Contractor clamp, Jaw Capacity (in.): 50, Material Type: Aluminum4. EZSMART Track Saw System 108"
Feature
For saws with blades 6 , 7 or 8 inch.Provides safe, straight precise cuts on or off the guide rail.
Replaceable zero clearance anti-chip edge, Cuts at 90 degrees or beveled.
Clean splinter free cuts, Patented dual sided track, cuts in both directions.
Lightweight yet rugged for jobsite portability.
Description
Your circular saw moves in a straight line along the EZSMART Guide Rail, you are in complete control, the cut is clean, chip free, and right on the mark. You will feel confident and safe using your circular saw when mounted on the EZSMART Universal Saw Base, as it glides along the EZSMART Guide Rail. You will be able to make long precise rip cuts, cross cuts, angle cuts, at 90 degrees or beveled, in both directions, while all the time the wood is being held captive under the EZSMART Guide Rail eliminating the potential of dangerous "Kick Back". The EZSMART Guide Rail, fitted with the EZSMART Anti-Chip Edge, works in conjunction with Anti-Chip Inserts on the EZSMART Universal Saw Base, to provide zero clearance at each side of the blade, resulting in clean splinter free cuts. In addition to these features, when used off the EZSMART Guide Rail, protection from dangerous Anti-Kickback is provided by EZSMART Anti-Kickback Fin that acts like a riving knife to hold the material open and prevent binding. The real test of a Track Saw System is how well it performs on small and narrow boards, or, where the cuts are too wide for your miter saw and too long for free hand. Using the included low profile, adjustable, EZSMART Smart Clamps, you can secure small boards under the guide rail, in any position or at any angle you need to make your cut, or, secure the track to larger material for longer cuts. Manufactured from high grade aluminum ensures the EZSMART Guide Rail is lightweight for portability yet this geometrically designed extrusion provides rigid, no twist stability making it a true job site portable option over a table or miter saw. Owning the EZSMART Track Saw System introduces you to many more innovative and labor saving accessories that are all designed to work seamlessly together, allowing you to grow your system to accommodate your woodworking needs.5. Milwaukee Rip Fence Kit, Model# 49-22-4146
Feature
Includes two thumb screwsModel 49-22-4146
U.S.A.
Description
Milwaukee 49-22-4146 Rip Fence KitSince its founding in 1924, Milwaukee has focused on a single vision: to produce the best heavy-duty electric power tools and accessories available to professional user. Today, the Milwaukee name stands for the highest quality, durable and reliable professional tools money can buy.This Rip Fence provides a straight cutting edge when attached to Milwaukee Circular Saw models 6405-6 8-1/4 inch, 6390-20, 6390-21, 6394-21 7-1/4 inch and 6460 10-1/4 inch. The kit includes two thumb screws. Milwaukee 49-22-4146 Rip Fence Kit Features:; Provides a straight cutting edge; For use with Milwaukee Circular Saws.6. Kreg KMA2675 Kreg Rip-Cut
Feature
Connects to most circular saws-right or left bladeReversible Guide Arm for Right or Left Hand Use
Rips cuts from 1/8-Inch to 24-Inch wide
No measuring, marking, and no chalk lines
100-Percent Guide support through entire cut
Description
Ripping down large panels into smaller more manageable workpieces is one of the trickiest, most intimidating, and expensive steps of any wood project. Even if you're ripping with the nicest table saw, you're still forced to lift large heavy panels, balance them carefully to avoid binding and bowing, while at the same time trying to support the finished workpieces and waste material as they exit the saw. There is a faster way. There is an easier way! There is a better way. Introducing the all-new Kreg Rip-Cut. The Rip-Cut is an incredibly handy tool which speeds and simplifies the process of ripping down large plywood and MDF panels. No measuring, no marking, no chalk lines-the Rip-Cut quickly and easily attaches to almost any circular saw, letting you cut pieces from 1/8-Inch up to 24-Inch wide with tremendous accuracy. The Rip-Cut is a no-nonsense, straight forward, accessory for your circular saw. It features a durable design including a solid aluminum guide rail, an easy-to-read adjustable scale, and a reversible guide arm which works whether you're left or right handed and whether your blade is on the left or right side of the saw. It's an incredibly easy, precise, and affordable way to break down large panels for almost any project.7. TRACK SAW True Trac 8' Combo Kit
Feature
Track saw system that work with any saw.Universal Adapter Plate adapts any circular saw to work with the True Trac Rails.
Portable
105" capacity can be extended with additional track
Router attachment available
Description
This is not a straight edge guide, but a rail system that allows you to mount any circular saw onto the adapter plate for perfectly straight cuts with no kickbacks or offset calculations. Makes quick work of breaking down sheets goods. The saw rides on the aluminum extruded patent-pending track, and the matching grooves of the adapter plate mesh perfectly, eliminating side-to-side play while allowing easy forward and reverse movement. Components break down easily for storage or transport to job site. This is not a straight edge guide, but a rail system that allows you to mount any circular saw. Makes quick work of sheet goods. The TrueTrac combines a uniquely designed aluminum extrusion and a matching universal adapter plate that allows you to use any circular saw. This design positions your saw on top of the track, not against it, and allows for zero play between the Adapter Plate and the track, giving you complete control of your saw. The edge of the track features a polyvinyl strip, which you will trim with your first use, but from then on this will mark the exact cut position of your blade -- no offset measuring from the blade to saw base required! The polyvinyl strip also provides zero clearance for a clean, chip-free cut, combined with a non-slip bottom surface to keep the track in place while you cut! The unique design that is built into the TrueTrac guarantees an accurate and easy cut every time, and sets it apart from the competition. Common TrueTrac Uses: Breakdown 4' x 8' sheet goods Crosscut single or multiple boards at one time Rip narrow boards (like with a table saw) Bevel the edges of sheet good or individual boards Shave thin strips off work piece edges to produce boards of precise widths Cut tapered shapes for cabinet fillers and similar projects Straight edge rip of irregular edges Optional extension kits to take your capability to 100" or beyond.8. Gyokucho 770-3600 Razor Ryoba Saw with Blade
Feature
Modern variation of the traditional Japanese pull-stroke saw2 saws in 1
Use finer side for crosscut work
Turn over to use for rip work
.5mm thick blade gives a fine kerf
Description
Our Razorsaw 7" Double Edge Ryoba Saw made by Gyokucho has a blade length of 7" and an overall length of 15". The cross cut side has 19tpi, and the rip side has 9 tpi. A unique feature of the Gyokucho Ryoba Saws is the handle which can be tilted in relation to the blade. This allows access into areas otherwise awkward or impossible to reach. Carpenters, restoration workers and boat builders will find this feature particularly useful. The teeth are impulse hardened for extended wear. The handles are wrapped with rattan for a secure grip. The various blades can be interchanged. This Gyokucho saw has been designed to easily fit into a tool box or work bag. Use #155638 for replacement blade.9. SKIL 3386-01 2.5-Amp 9-Inch Band Saw
Feature
Rip fence for straight, accurate cuts. 6-TPI band saw blade cuts through a variety of wood materialsArticulating LED work light for better view of work piece and cut-line
Features a 1-1/2-inch dust port that keeps work area clear of dust
Rack and pinion table adjustment for quick angle and height adjustments
Motor is 1-speed for wood or metal based materials
Description
The SKIL 3386-02 120-volt 9-inch band saw features a 2.5-Amp motor, a ribbed aluminum table with tilting adjustment ranging from 0 to 45, and a blade guide adjustment for custom depth settings. This versatile band saw is intelligently designed with an attached flexible lamp for increased visibility and a mitre gauge. The table top is a full 11-13/16-inch square and the cutting depth is 3-1/8-inch with a throat depth of 9-inches. It comes with a flexible work light, blade, parallel guide, miter gauge, and hex key.10. Bosch Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter RA1054
Feature
Precision fine adjustment control. works with following products: MRF01, VAC006, MRF23EVS, VAC021, 1618EVS, 1617, 1617EVSTB, 1617EVSPK, MRP23EVS, 1619EVS.Guides cut along the workpiece or up to 8" in from edge.
Easily converts into circle guide for making arcs and circles up to 32" in diameter.
Includes router guide, pivot plate, dust extraction hood, vacuum hose adaptor, attachment hardware.
1-year warranty