When you looking for masonry screws, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable masonry screws is not an easy task. In this post, we show you how to find the right masonry screws along with our top-rated reviews. Please check out our suggestions to find the best masonry screws for you.
Reviews
1. Ribbed Plastic Drywall Anchor Kit with Screws and Masonry Drill Bit, #10-12 x 1"
Feature
These plastic anchors are intended for light duty anchoring applications and offer extra supportThe split in the ribbed anchors expand on two opposing sides as you tighten the screw
Ribs prevent the anchor from turning in the hole during installation
The split in the anchor ensures three way expansion on sides for increased holding power
Kit Includes: 100 #10-12 x 1" Plastic anchors, 100 #10 x 1-1/4'' Screws, One 1/4'' x 4'' Drill Bit
Description
Kit Includes: 100 #10-12 x 1" Plastic anchors, 100 #10 x 1-1/4'' Screws, One 1/4'' x 4'' Masonry Drill Bit & Plastic Case
These plastic anchors are intended for light duty anchoring applications and offer extra support for loads.
The split in the ribbed anchors expand on two opposing sides as you tighten the screw.
Ribs prevent the anchor from turning in the hole during installation.
The split in the anchor ensures three way expansion on sides for increased holding power.
Once installed, they provide a flush, clean appearance in drywall.
The anchor's fins prevent the anchor from turning in the hole during and after installation.
The split in the anchor ensures three way expansion on sides for increased holding power.
Used with sheet metal, wood and lag screws in hollow walls.
Can be used in light masonry or masonry block applications.
Requires a pre-drilled hole for installation.
Installing anchors correctly is key to a strong hold that lasts.
2. T.K.Excellent Blue Conical Plastic Anchor and Self Tapping Screw and Masonry Drill Bit,201 Pieces
Feature
The anchors pre-drills precise hole in types of drywallThe split in the anchor ensures three way expansion on sides for increased holding power
Once installed, they provide a flush, clean appearance in drywall
Re-useable, full-visibility packaging simplifies product selection and storage
Kit includes #10-#12 anchor,1/4"x4"Masonry Drill Bit,#10x1" phillps/slotted pan head self-tapping screwsANSI) and a Plastic Case
Description
INCLUDES:
anchor #10-#12
Masonry Drill Bit 1/4"x4"
phillps/slotted pan head self-tapping screwsANSI) #10x1"
INSTRUCTIONS:
Requires a pre-drilled hole for installation.
Can be used in light masonry or masonry block applications.
The split in the anchor ensures three way expansion on sides for increased holding power.
Once installed, they provide a flush, clean appearance in drywall.
WARNING:
Wear safety goggles
3. Ansen Tools AN-133 Diamond Tip Hex Head Concrete Screw Anchor 3/16" x 1 1/4". 100 Piece With Drill Bit
Feature
Diamond tip penetrates extra hard materialsLifetime corrosion resistance
ICC Listed for quality assurance
Hi-lo self-tapping thread design
Advanced Envirocoat plating process
Description
The Ansen Tools AN 108 Diamond Tip Hex Head Concrete Screw Anchor with its Diamond Tip is designed for the most precise penetration in extra hard materials. The screws are made from high-grade hardened carbon steel with the advanced plating process; Envirocoat, which provides lifetime corrosion resistance. Drill bit included for pilot hole in concrete. Screw anchors are ICC Listed for Quality Control (see report ER-5045). Box comes with 100 screw anchors and carbide tipped drill bit.4. Ansen Tools AN-113 Diamond Tip Phillips/Flat Head Concrete Screw Anchor 3/16" x 1 1/4". 100 Piece With Drill Bit
Feature
Diamond tip penetrates extra hard materialsLifetime corrosion resistance
ICC Listed for quality assurance
Hi-lo self-tapping thread design
Advanced Envirocoat plating process
Description
The Ansen Tools AN 113 Diamond Tip Phillips/Flat Head Concrete Screw Anchor with its Diamond Tip is designed for the most precise penetration in extra hard materials. The screws are made from high-grade hardened carbon steel with the advanced plating process; Envirocoat, which provides lifetime corrosion resistance. Drill bit included for pilot hole in concrete. Screw anchors are ICC Listed for Quality Control (see report ER-5045). Box comes with 100 screw anchors and carbide tipped drill bit.5. Hillman 41567 Blue Flat Head Phillips Tapper Concrete Screw Anchor, 3/16 X 2 1/4 Inch, 20-Pack
Feature
BLUE Perma-Seal coatedFor use with treated lumber
Building code approved
Description
State of the art thread design cuts into concrete. Tapper screws are designed for fastening applications in concrete, block and brick. Use Tapper screws to attach electrical equipment, two by fours, downspout straps, hose reels, flag poles, hurricane shutters and more. Tapper screws are perfect for indoor and outdoor use. For light to medium duty applications.6. 5pcs Masonry Drill Bits Set Concrete Brick Drywall Anchors Screws Assortment Kit
Feature
Penetrate concrete, concrete blocks, brick, tile or stone with your power drillFive sizes: 5/32(4mm), 3/16(5mm), 15/64(6mm), 5/16(8mm), & 3/8"(10mm)
Package:1X 5 pcs Masonry Brill Bit Set + 1 x Setscrews Set in Plastic Case
Description
Concrete masonry drill bit set in plastic case, Carbide Tip7. MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3/16" Diameter x 1-3/4" Length (Box of 100)
Feature
Commonly known as "Tapcon"High strength steel for use in all types of solid and hollow masonry, wood and stone
Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test
Cuts its own threads; hex head version offers 2 drive methods
Fast, easy installation; drill bit included in each box
Description
MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.8. MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 1/4" Diameter x 2-3/4" Length (Box of 100)
Feature
Commonly known as "Tapcon"High strength steel for use in all types of solid and hollow masonry, wood and stone
Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test
Cuts its own threads; hex head version offers 2 drive methods
Fast, easy installation; drill bit included in each box
Description
MKT Fastening steel conset masonry screw anchor. Commonly known as "Tapcon". Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads; hex head version offers 2 drive methods. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.9. Ansen Tools AN-115 Diamond Tip Hex Head Concrete Screw Anchor 1/4" x 1 1/4". 100 Piece With Drill Bit
Feature
Diamond tip penetrates extra hard materialsLifetime corrosion resistance
ICC Listed for quality assurance
Hi-lo self-tapping thread design
Advanced Envirocoat plating process
Description
The Ansen Tools AN 115 Diamond Tip Hex Head Concrete Screw Anchor with its Diamond Tip is designed for the most precise penetration in extra hard materials. The screws are made from high-grade hardened carbon steel with the advanced plating process; Envirocoat, which provides lifetime corrosion resistance. Drill bit included for pilot hole in concrete. Screw anchors are ICC Listed for Quality Control (see report ER-5045). Box comes with 100 screw anchors and carbide tipped drill bit.10. MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3/16" Diameter x 2-3/4" Length (Box of 100)
Feature
Commonly known as "Tapcon"High strength steel for use in all types of solid and hollow masonry, wood and stone
Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test
Cuts its own threads; hex head version offers 2 drive methods
Fast, easy installation; drill bit included in each box