Thing need consider when find grooving tool?

When you want to find grooving tool, you may need to consider between many choices. Finding the best grooving tool is not an easy task. In this post, we create a very short list about top 11 the best grooving tool for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 11 grooving tool:

Product Features Editor's score Go to site
American Carbide Tool Carbide-Tipped Tool Bit for Cutoff, Neutral, 883 Grade, 0.5 American Carbide Tool Carbide-Tipped Tool Bit for Cutoff, Neutral, 883 Grade, 0.5" Square Shank, CT 121 Size
Go to amazon.com
Tobytools MGEHR1212-3 Lathe Cut-Off Grooving Tool Holder With 10pcs MGMN300 Inserts Tobytools MGEHR1212-3 Lathe Cut-Off Grooving Tool Holder With 10pcs MGMN300 Inserts
Go to amazon.com
2 Pcs/set Tongue & Groove Router Bit Set 3/4 2 Pcs/set Tongue & Groove Router Bit Set 3/4" Stock 1/4" Shank 3 Teeth T-shape Wood Milling Cutter,Hardened Steel Grooving Router Bits for Woodworking Tool
Go to amazon.com
HomeRight Deck Pro with Gap Wheel, Pivoting Handle and 7-1/2 Inch Wide Deck Pad C800920 M Deck Stain Applicator, Grooving Tool, Stain Applicator Pad HomeRight Deck Pro with Gap Wheel, Pivoting Handle and 7-1/2 Inch Wide Deck Pad C800920 M Deck Stain Applicator, Grooving Tool, Stain Applicator Pad
Go to amazon.com
Micro 100 OR-096-8 Micro 100 OR-096-8 "O" Ring Grooving Tool, Solid Carbide Tool, 0.096"/0.098" Groove Width, 0.100" Projection, 0.010"/0.020" Tool Radius, 0.250" Minimum Hole Diameter, 0.500" Maximum Hole Depth, 0.2500" Shank Diameter, 2.5" Overall Length
Go to amazon.com
HHIP 6024-3053 MGMN-300-M Grade BPG20B-PVD Cut-Off and Grooving Insert, .118 HHIP 6024-3053 MGMN-300-M Grade BPG20B-PVD Cut-Off and Grooving Insert, .118" Cutting Width, .156" OAL
Go to amazon.com
AccusizeTools - 1/2 AccusizeTools - 1/2" Cut-off Holder, Parting Tool, MGEHR08-2J of 2387-2004
Go to amazon.com
Accusize - 3/4 Accusize - 3/4" Shank, 2pcs/set Indexable Groove Tools, #0028-1640
Go to amazon.com
Micro 100 UC-25030-8 Right Hand Undercut Grooving Tool, 0.030 Micro 100 UC-25030-8 Right Hand Undercut Grooving Tool, 0.030"/.032" Groove Width, 0.050" Projection, 0.260" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.2500" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool
Go to amazon.com
Micro 100 QRR-062-16 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.062 Micro 100 QRR-062-16 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.062" (1.57 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.370" (9.4 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.3750" (9.5 mm) Shank Diameter, 2.5" (64 mm) Overall Length
Go to amazon.com
Micro 100 RR-062-8 Right Hand Retaining Ring Grooving Tool, Solid Carbide, 0.062/0.064 Micro 100 RR-062-8 Right Hand Retaining Ring Grooving Tool, Solid Carbide, 0.062/0.064" Groove Width, 0.100" Projection, 0.375" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.375" Shank Diameter, 2.5" Overall Length
Go to amazon.com
Related posts:

Reviews

1. American Carbide Tool Carbide-Tipped Tool Bit for Cutoff, Neutral, 883 Grade, 0.5" Square Shank, CT 121 Size

Feature

CT-style tool shape has a 5-degree end cutting angle and a taper on the non-cutting side for cutoff or grooving of solid bars and tubing stock
Carboloy 883 grade uncoated carbide tip for machining of cast iron and nonferrous materials
Right-hand cutting direction for right-to-left feed
Positive rake angle provides a sharp edge for making continuous cuts
Square steel shank fits square toolholders

Description

The American Carbide Tool CT-style 883 grade carbide-tipped brazed tool bit has a right-hand cutting direction for cutoff or grooving on cast iron and nonferrous materials. The CT-style, also called COR-style, tool shape has a 5-degree end cutting angle and a taper on the non-cutting side for cutoff or grooving of solid bars and tubing stock, and a right-hand cutting direction for right-to-left feed. The tool has a positive, 6-degree rake angle that provides a sharp edge for making continuous cuts. The tool has a Carboloy 883 grade uncoated carbide tip, which provides good resistance to wear for machining on cast iron and nonferrous materials. Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tip is brazed to a square steel shank that fits square toolholders.

Brazed tools, often called single-point brazed carbide-tipped tools, are used for metal shaping on lathes or screw machines. These single-point tools have a cutting edge at one end that is a carbide tip brazed to a steel shaft. They come in multiple geometry styles for cutting different shapes and are identified by a lettering standard that conforms to American National Standards Institute (ANSI) B212.1 specifications. The tool has a side cutting edge and end cutting edge, with the tool shape style defining which cutting edge is principal and auxiliary. Brazed tools are available in three hand options: right, left, and neutral. A right-hand tool has its principal cutting edge on the right side of the tool to feed into the workpiece from right to left, a left-hand tool feeds into the workpiece from left to right, and a neutral-hand tool will cut either left to right or right to left. The side cutting and end cutting edge angles, in combination with the angle at which the tool is positioned in relation to the workpiece (also called the lead angle), influence the tool's cutting shape and action. Rake angles are the degree of inclination of the face toward or away from the cutting edge. They may be positive for sharp, continuous cuts, negative for heavy, interrupted cuts, or neutral for a true 90-degree cut. The tip, or nose, of the tool performs the finish cut on the workpiece. In general, a larger tip radius will produce a better surface finish and permit a faster feed rate than a smaller tip radius.

American Carbide Tool manufactures standard single-point brazed carbide-tipped tools, and precision ground cutting tools and inserts. The company, founded in 1953, is headquartered in Canton, OH.

2. Tobytools MGEHR1212-3 Lathe Cut-Off Grooving Tool Holder With 10pcs MGMN300 Inserts

Feature

Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC.
High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing;
To maintain tight tolerances unmatched performance;
Practical and a variety of processing environments, even in very dirty environments such as cast iron also has good features;User clamping and convenient way to replace, only a wrench to complete the replacement of the knife blade and pad;Accessories steel is good, long life, reducing the user cost of the tool.

Description

Model: MGEHR1212-3
Material: Tungsten Steel
Shank Diameter: 1.2cm/0.47inch
Holder Length: 100mm/3.94inch
Direction: Right Hand
Suitable Inserts: MGMN300 (10pcs) (3mm Width)

Package included:
10X MGMN300 Insert
1X MGEHR1212-3 Lathe Grooving Holder

3. 2 Pcs/set Tongue & Groove Router Bit Set 3/4" Stock 1/4" Shank 3 Teeth T-shape Wood Milling Cutter,Hardened Steel Grooving Router Bits for Woodworking Tool

Feature

Suitable for woodworkin
Totally enclosed & lubricated
Solid hardened steel bodies with anti kickback design.
Cutters to slice smoothly into stock producing clean, splinter free.
Build-up & heat resistant teflon coating.

4. HomeRight Deck Pro with Gap Wheel, Pivoting Handle and 7-1/2 Inch Wide Deck Pad C800920 M Deck Stain Applicator, Grooving Tool, Stain Applicator Pad

Feature

7-1/2 inch wide pad 2-1/2 inch wheel
Adjustable pivoting handle can be attached to a pole for longer reach
Stain applicator pad is durable and will hold 3 oz of stain, 300% more than a 4" brush
Spring loaded gap wheel drops 3/4" down in-between the boards to stain board edges
For use on decks and railings

Description

Now there is a way to cover surfaces and gaps between the boards at the same time. The Gap Wheel Stain Applicator is the fastest, easiest way to stain. Simply load the stain applicator pad with stain and cover the surface and gap in one-pass. The Gap Wheel: Spring loaded wheel drops 3/4" down in-between the boards to stain board edges. The Non-sticking Gap Wheel easily moves with applicator and climbs in and out of board gaps, no snagging or getting stuck. The Stain Applicator Pad: 1/4" inch flocked neoprene pad holds 3 oz of stain, 300% more than a 4" brush or foam applicator. The flocked pad has 18,000 fiber/sq inch allowing stain to be thoroughly worked into wood without streaking. Far better than brush results. Stain applicator with Gap Wheel stains 16 feet in one fill, compared to 4 feet with a 4" brush. Stain Pad Adhesive is durable - no pad separation after soaking in mineral spirits for 8 hours. Stain pad backing is made of Neoprene which is a synthetic rubber that exhibits good chemical stability and maintains flexibility over a wide temperature range. Same material used in scuba suits. The Stain Applicator Handle: Pivoting handle can be attached to a pole for longer reach, Comfort grip handle and Adjustable handle bends down to fit under railings. Easy to use, just add stain. Load in standard tray.

5. Micro 100 OR-096-8 "O" Ring Grooving Tool, Solid Carbide Tool, 0.096"/0.098" Groove Width, 0.100" Projection, 0.010"/0.020" Tool Radius, 0.250" Minimum Hole Diameter, 0.500" Maximum Hole Depth, 0.2500" Shank Diameter, 2.5" Overall Length

Feature

"O" Ring Grooving Tools
Lockdown flat automatically locates tool on center
Made in USA

Description

The MICRO 100 OR-096-8 uncoated solid carbide retaining o-ring grooving tool. Designed and engineered for most machining applications that requires specific o-ring groove width(s). Tools can be utilized for both roughing and finishing. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

6. HHIP 6024-3053 MGMN-300-M Grade BPG20B-PVD Cut-Off and Grooving Insert, .118" Cutting Width, .156" OAL

Feature

Chip breaker is designed for turning, grooving and parting applications
Specially designed chip breaker allows for a smoother chip flow versus conventional flattop geometries through the use of a central chip breaker
Specially placed convex dots assist with chip control in external machining, for a smoother chip flow
PVD coated micro-grain carbide can be used for a Varity of stainless steel finishing at medium to low cutting speeds
Excellent edge strength and high surface quality provide the perfect ride when cutting

Description

HHIP MGMN-300-M Grade BPG20B-PVD Cut-off and grooving insert is specially designed chip breaker allows for a smoother chip flow versus conventional flattop geometries through the use of a central chip breaker. Chip breaker is designed for turning, grooving and parting applications. Specially placed convex dots assist with chip control in external machining, for a smoother chip flow. PVD coated micro-grain carbide can be used for a Varity of stainless steel finishing at medium to low cutting speeds. Excellent edge strength and high surface quality provide the perfect ride when cutting. High thermal shock resistance. Suitable for light interrupted cuts. Cutting width is .118. Overall length is .156. d is .093. Cutting edge height is .189. r is 1/64.

7. AccusizeTools - 1/2" Cut-off Holder, Parting Tool, MGEHR08-2J of 2387-2004

Feature

Shank Size (H x W): 1/2" x 1/2"; Insert model for this holder: Carbide insert TiN Coated MGMN-2 Double End Cut-off
Please note that this tool holder comes with NO insert installed. Only a holder.
Black oxided smooth finished.
The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set.

8. Accusize - 3/4" Shank, 2pcs/set Indexable Groove Tools, #0028-1640

Feature

External: SCVER16-4D
Internal: S12R-SVNER4
Comes with wrench and fitted Alu. Box

Description

  • External: SCVER16-4D
  • Internal: S12R-SVNER4
  • Carrbide inserts:
    • 0.043"x2ps
    • 0.05"x2ps
    • 0.063"x2ps
    • 0.073"x1pc
    • 0.085"x1pc
    • 0.124"x1pc
    • 0.1"x1pc

    9. Micro 100 UC-25030-8 Right Hand Undercut Grooving Tool, 0.030"/.032" Groove Width, 0.050" Projection, 0.260" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.2500" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool

    Feature

    Undercut Grooving Tools
    Lockdown Flat automatically locates tool on center
    Made in USA

    Description

    MICRO 100, UC-25030-8, solid carbide, undercut grooving tools. Designed and engineered to perform in applications where specific grooves are required in diameters beyond the size of the minimum minor diameter. Tool design allows for precision and rigidity. Can be used for roughing or finishing. Best suited for soft, medium, to hard materials. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own, resulting from an exclusive treating process that allows for increased speeds and feeds and extended tool life. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed.

    10. Micro 100 QRR-062-16 Quick Change Retaining Ring Grooving Tool, Solid Carbide Tool, 0.062" (1.57 mm) Groove Width, 0.100" (2.54 mm) Projection, 0.370" (9.4 mm) Minimum Bore Diameter, 1.000" (25.4 mm) Maximum Bore Depth, 0.3750" (9.5 mm) Shank Diameter, 2.5" (64 mm) Overall Length

    Feature

    Retaining Ring Groove Tools
    Quick Change Tooling - Micro-Quick
    Made in USA

    Description

    The MICRO 100 QRR-062-16 uncoated, solid carbide, retaining ring grooving tool for utilization in the Micro-Quik Change Tooling System . Designed and engineered for most machining applications that requires specific groove width(s). Tools can be utilized for both roughing and finishing. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. The Micro-Quik Tooling System provides maximum centerline repeatability within plus or minus 0.0005" from tool to tool. When all of the components are used together, this unique system reduces machine setup, downtime, tooling costs, and tooling inventories all while boosting productivity. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

    11. Micro 100 RR-062-8 Right Hand Retaining Ring Grooving Tool, Solid Carbide, 0.062/0.064" Groove Width, 0.100" Projection, 0.375" Minimum Bore Diameter, 0.500" Maximum Bore Depth, 0.375" Shank Diameter, 2.5" Overall Length

    Feature

    Retaining Ring Grooving Tools
    Lockdown flat automatically locates tool on center
    Left Hand and Metric Sizes Available too
    Made in USA

    Description

    The MICRO 100 RR-062-8 uncoated solid carbide retaining ring grooving tool. Designed and engineered for most machining applications that requires specific groove width(s). Tools can be utilized for both roughing and finishing. Manufactured with close tolerances to ensure ultimate precision and performance. Each tool's cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. MICRO 100 Solid Carbide Tools feature more than just a micro-grain of excellent quality. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. For over 45 years, MICRO 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

    Conclusion

    All above are our suggestions for grooving tool. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using grooving tool with us by comment in this post. Thank you!