The 16 best hasp lockout

The Zing RecycLockout aluminum lockout hasp is made of 50% recycled aluminum, coated with red polyester for corrosion resistance and high visibility, with a jaw that closes to form a 3/8" diameter shackle held closed by up to six padlocks (sold separately) secured through a scissor-action handle. When this hasp is closed, the two halves of its handle overlap like scissors, and the six holes in each half of the handle align to create six locking holes, any of which, when blocked by a padlock, obstruct the hasp's jaw from opening and allowing access to the locked-out device or energy source. Each locking hole accommodates a padlock shackle up to 3/8" outside diameter. This hasp is part of a lockout/tagout (LOTO) safety procedure required at facilities where devices and energy sources need multiple-person authorization to be accessed safely during maintenance and repair.

Lockout/tagout (LOTO) safety procedures require that lockout devices meet Occupational Safety and Health Administration (OSHA) 1910.147(c)(5) standards for quality assurance. LOTO devices use color, warning labels or tags, and sometimes a physical barrier to help prevent machine operation or power activation during maintenance and repair.

Zing Green Products manufactures environmental signs and safety equipment from recycled materials. The company, founded in 2007, is headquartered in Oswego, IL.

The Master Lock lockout hasp with vinyl coated handle and locking tabs has a heavy gauge (1/16") steel jaw that closes to form a 1/4" diameter shackle held closed by two pry-resistant locking tabs and up to six padlocks secured through a scissor-action handle. When this hasp is closed, the two halves of its handle overlap like scissors, and the six holes in each half of the handle align to create six locking holes, any of which, when blocked by a padlock (sold separately), obstruct the hasp's jaw from opening and allowing access to the locked out device or energy source. Each locking hole accommodates a padlock shackle up to 9/32" outside diameter. The steel jaw is zinc plated to resist corrosion, and fits into latch holes 5/16" or larger. The handle is coated with non-conductive red vinyl to improve grip and protect equipment from scratching. This hasp is for use as part of a lockout-tagout (LO/TO) safety procedure required at facilities where a device or energy source needs multiple-person authorization to be accessed safely. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials.

Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and reduce accidents, during maintenance or repair. Lockout hasps are often used to secure energy sources in the off position during maintenance or repair when multiple workers are on the job. They consist of one shackle that can be locked closed by one or more padlocks, providing the ability to use multiple padlocks in a place where only one shackle will fit.

Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

The Master Lock snap-on lockout hasp with tag has a spring-loaded locking arm that pushes open then snaps closed and can be kept from reopening by up to five padlocks (sold separately) as part of a lockout-tagout (LO/TO) safety procedure required at facilities where a device or energy source needs multiple-person authorization to be accessed safely. Its spark-resistant, anodized aluminum body and stainless steel parts are durable and corrosion resistant. The hasp ships with three (English, French, and Spanish) high-visibility warning labels with erasable areas for task-specific details. This hasp measures 7 x 2-7/8 inches (17.8 x 7.3 cm), and its closed jaw forms an oval measuring 1-3/4 inches (4.4 cm) short inside diameter, 2-1/8 inches (5.4 cm) long inside diameter, with a 1/2" opening. The five padlock holes in the hasp accommodate shackle diameters up to 9/32". When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials.

Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and reduce accidents, during maintenance or repair. Lockout hasps are often used to secure energy sources in the off position during maintenance or repair when multiple workers are on the job. They consist of one shackle (or clasp) that can be locked closed by one or more padlocks, providing the ability to use multiple padlocks in a place where only one shackle will fit.

Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

The Master Lock aluminum lockout hasp with plastic-coated handle has a spark-resistant aluminum jaw that closes to form a shackle held closed by up to six padlocks secured through a scissor-action handle. When this hasp is closed, the two halves of its handle overlap like scissors, and the six holes in each half of the handle align to create six locking holes, any of which, when blocked by a padlock (sold separately), obstruct the hasp's jaw from opening and allowing access to the locked out device or energy source. The handle is coated with non-conductive plastic to improve grip and protect equipment from scratching. This hasp is for use as part of a lockout-tagout (LO/TO) safety procedure required at facilities where a device or energy source needs multiple-person authorization to be accessed safely. When used according to manufacturer's recommendations, this product is covered by a limited lifetime warranty against defects in workmanship or materials.

Lockout-tagout (LO/TO) safety procedures, as defined by Occupational Safety and Health Administration (OSHA), require that lockout devices be durable and standardized. Lockout devices use color, warning labels or tags, and a physical barrier to temporarily prohibit machine operation or power activation, and help reduce accidents, during maintenance or repair. Lockout hasps are often used to secure energy sources in the off position during maintenance or repair when multiple workers are on the job. They consist of one shackle that can be locked closed by one or more padlocks, providing the ability to use multiple padlocks in a place where only one shackle will fit.

Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

The Master Lock steel lockout hasp has hinged flanges that close over a shackle to form one locking hole with capacity for eight padlocks (sold separately), providing the ability to require multiple authorizations to allow access to one locked out device or energy source. The hasp has 0.42"/10.67 mm thick steel flanges and a 1/4" steel diameter shackle that are plated to resist corrosion, and a 3" inside jaw clearance for extra length. It measures 6-5/8 x 2-3/8" (16.8 x 6 cm) (H x W). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.) This hasp is part of a lockout/tagout (LOTO) safety procedure required at facilities where devices and energy sources need multiple-person authorization to be accessed safely during maintenance and repair.

Lockout/tagout (LOTO) safety procedures require that lockout devices meet Occupational Safety and Health Administration (OSHA) 1910.147(c)(5) standards for quality assurance. LOTO devices use color, warning labels or tags, and sometimes a physical barrier to help prevent machine operation or power activation during maintenance and repair.

Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

The Master Lock 4mm stainless steel lockout hasp has a 4 mm diameter shackle to fit smaller lockout points than most lockout hasps, and hinged flanges that close to form eight locking holes for padlocks (sold separately), providing the ability to require multiple authorizations to allow access to one locked out device or energy source. The hasp is made from 316 grade stainless steel for corrosion resistance, and the locking holes accommodate padlock shackles up to 9/16" outside diameter. It measures 5-1/4 x 1-3/4" (13.3 x 4.4 cm) (H x W) with a 1"/2.5 cm inside jaw clearance. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.) This hasp is part of a lockout/tagout (LOTO) safety procedure required at facilities where devices and energy sources need multiple-person authorization to be accessed safely during maintenance and repair.

Lockout/tagout (LOTO) safety procedures require that lockout devices meet Occupational Safety and Health Administration (OSHA) 1910.147(c)(5) standards for quality assurance. LOTO devices use color, warning labels or tags, and sometimes a physical barrier to help prevent machine operation or power activation during maintenance and repair.

Master Lock manufactures padlocks, combination locks, and related security products. The company, founded in 1921, is headquartered in Milwaukee, WI.

The Horizon steel lock out-tag out hasp with rubberized coating has a steel jaw that is zinc-plated to resist corrosion, and can be held closed by up to six padlocks (sold separately) secured through a scissor-action handle. When this hasp is closed, the two halves of its handle overlap like scissors, and the six holes in each half align to create six locking holes, any of which, when blocked by a padlock, obstruct the hasp's jaw from opening and allowing access to the locked-out device or energy source, providing the ability to require multiple authorizations for access to one lockout target. Each locking hole accommodates a padlock shackle of up to 3/8" outside diameter. The handle is coated with nonconductive vinyl to improve grip and protect equipment from scratching. This hasp is for use as part of a lockout/tagout (LOTO) safety procedure required at facilities where a device or energy source needs multiple-person authorization to be accessed safely.

Lockout/tagout (LOTO) safety procedures require that lockout devices meet Occupational Safety and Health Administration (OSHA) 1910.147(c)(5) standards for quality assurance. Lockout/tagout (LOTO) devices use color, warning labels or tags, and sometimes a physical barrier to help prevent machine operation or power activation during maintenance and repair.

Horizon Manufacturing Enterprises, Inc., manufactures Rack'Em brand storage & organizational racks and other tools. The company, founded in 1990, is headquartered in Lake Zurich, IL.