Finding the best heatsink extruder suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Zorvo 3d Printer Hot End Metal V6 J-Head Hotend Extruder for RepRap 3d Printer Extruder Parts1.75mm Filament, Direct Feed or Bowden 0.4mm Nozzle, 12V fan, and 3ft PTFE Bowden Tube
Feature
Temperature:This Hotend with High Temperature Performance, can reach over 230C.HeaterBlock gives the fastest heat up times and the most responsive temperature control.Application: Hotend can be used for both: direct feed and bowden applications. Good for ABS, PLA and other conventional print materials.
Included: NTC3950 thermistors and 12V 40W heater, 1 meter bowden tude 4mm OD 2mm ID,PC4-M6 Straight Fitting
Type:V6 J-head, can be used either as bowden or direct feed style
Warranty:30 DAY MONEY BACK GUARANTEE- All customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfactory for any reason. You have no risk to try.
Description
Description:With PTFE in hot regions of our HotEnd we can reach 230C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 230C.
This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 230C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.
NTC 3950 Thermistor parameters:
Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
Specification:
Type: Bowden V6 J-head
Thermister: 100K NTC
Package include:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
1 x One Meter long Bowden tubing 4mm OD 2mm ID
1 x PC4-M6 Straight Fitting
2. WINSINN Chimera Hotend Nozzle Heat Bock Heatsink Heat Break Extruder TitaniumUpgrade Volcano Brass Heater Block 0.4mm Stainless Steel for Sensor HT-NTC100K PT100 3D Printer 1.75mm
Feature
Can extrude 2 different filaments at the same time!TC4 Titanium alloy Heat Break - Ultra-low thermal conductivity, Make sure the printer stable operation.
3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
Made by WINSINN
Description
This is The Chimera Extruder Full kit, replacement parts is very easy, so you can easily upgrade your printer. High Speed Volcano Upgrade + High-quality stainless steel nozzle + all-copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let's try it :)))
---------------------------------------------------------------------------------------------------------------
TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.
---------------------------------------------------------------------------------------------------------------
This is the Sharp Volcano Nozzle for upgrade version. Nozzle Ensure Concentricity and Roundness.
Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm
---------------------------------------------------------------------------------------------------------------
Package include:
2 x High quality copper + stainless steel 1.75mm-0.4mm V6 nozzle
2 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
2 x High quality Standard V6 + Volcano +Copper heater block
2x TC4 titanium alloy + PTFE Teflon Heat Break
1 x Aluminum alloy Heat sink + PC4-01 Pneumatic fittings
2 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
1 x High Speed 3010 Fan 12V 0.1A 9000RPM
2 x Allen wrenc
3. TWP 5 pcs 3d printer parts for Makerbot MK7 / MK8 404011mm Heatsink Cooling Fin Aluminum Heat Sink Extruder Motor
Description
Name:HeatsinkMeterial:Aluminum
Color: Black
Fin length 40 mm width 40 mm thick 11 mm
Products introduction Makerbot is special, 42 stepper motor mounting holes from the right, the cooling area is larger
4. Farwind Aluminum Remote V6 Bowden Radiator Heatsink with 4.1mm Throat J-Head for 3D Printer Extruder
Feature
Material: AluminumBore Diameter: 4.1mm
Screw thread: M6
Description
Material: AluminumBore Diameter: 4.1mm
Screw thread: M6
Application: For 3D printer extruder
Package Included:
1 x E3D V6 Heatsink
5. Anet Aluminium Extruder Heatsink 5PCS, Makerbot MK7 / MK8 40 x 40 x 11mm Heatsink Cooling Cooler Fin for Anet 3D Printer Extruder Fan
Feature
Makerbot Heatsink, use for Anet 3d printer extruder;Size: 40*40*11mm
Aluminum material, fast heat dissipation;
Chip spacing and neat, larger heat dissipation area;
Surface oxidation treatment, fast heat dissipation, high hardness, beautiful color;
Description
Brand: AnetProduct: Makerbot Heatsink
Use for: Anet 3d printer
Dimensions: 40*40*11mm
Size of holes: 31mm
quantity: 5PCS
Material: aluminum
Advantages:
1. aluminum material, fast heat dissipation.
2. Chip spacing and neat, larger heat dissipation area.
3. Surface oxidation treatment, fast heat dissipation, high hardness, beautiful color.
4. High-quality 3d printer accessoried heat sink, original boutique.
5. Environmental protection, safety, harmless.
6. High-quality raw materials, fine workmanship.
7. Strict quality control system, quality assurance.
6. WINSINN V6 Heatsink Long Heat Sink Aluminum M7 for 3D Printer Remote Bowden J-Head V6 Extruder Hotend (Pack of 3Pcs)
Feature
For E3D V6 Remote J-Head Extruder HotendUniversal For 1.75mm and 3.00mmHeatsink Inner Bore: 4.2mm
Suitable For M7 thread V6 Heatbreak
Pneumatic Fittings Thread: 1/8" PT Male Thread ( PC4-01 or PC6-01 )
Made by WINSINN
Description
Color: Sliver
For E3D Remote J-Head Extruder Hotend
Suitable For M7 thread V6 Heatbreak
Material: High Quality Aluminum alloy
Pneumatic Fittings Thread: 1/8" PT Male Thread ( PC4-01 or PC6-01 )
---------------------------------------------------------------------------------------------------------------------
Package include:
3 x Remote V6 Heatsink
---------------------------------------------------------------------------------------------------------------------
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
7. WINSINN CR-10 Hotend Extruder Titanium Kit - 0.4mm Copper Stainless steel Nozzle CR10 For 3D Printer Creality CR-10 Printer CR10S, Ender 2, TronXY X5S
Feature
TC4 Titanium alloy Heat Break - Ultra-low thermal conductivity, Make sure the printer stable operation.High Quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
One more New CR-10 Heatsink (Bore 4.1mm, can pass through 4mm Tube)
For 1.75mm Filament
Made by WINSINN
Description
Latest Titanium alloy CR-10 Hotend Kit, One more New CR-10 Heatsink (Bore 4.1mm, can pass through 4mm Tube)
Nozzle Material: High quality Copper + stainless steel
Heatbreak Material: TC4 Titanium alloy
Heater Block Material: Aluminum alloy
Nozzle size: 0.4mm
Heatbreak size: Bore 2mm
Nozzle Ensure Concentricity and Roundness.
Support: CR-10 3D Printer, 1.75mm Filament.
---------------------------------------------------------------------------------------------------------------
Package include:
1 x Copper + stainless steel 0.4mm Nozzle
1 x Aluminum Heater Block
1 x TC4 Titanium alloy Heatbreak
1 x Aluminum CR10 Heat sink (Bore 2mm)
1 x Aluminum CR10 Heat sink (Bore 4.1mm)
1 x PC4-01 Pneumatic fittings
1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
2 x Allen wrenc
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
8. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Ball Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
Power Connection: 2 Pin-ph2.5Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
Description
This helps to prevent the heat from the nozzle traveling too far upwards. Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality. This is a DC 12V 0.08A cooling fan. Dimensions are 40mm x 40mm x 10 mm. Sufficient for use in 3D printing, operating speed is 6000 RPM. Equipped to properly cool your 3D printer's extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X. Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
9. WINSINN V6 Heatsink Short Heat Sink Aluminum M6 for 3D Printer Close Range Bowden J-Head V6 Extruder Hotend (Pack of 3Pcs)
Feature
For E3D V6 Proximity Short J-Head Extruder HotendSuitable For 1.75mmThe Bore which top of Heatsink: 2mm
Thread: M6 thread
Suitable For M6 thread - V6 25.1mm Heatbreak
Made by WINSINN
Description
For E3D Proximity Short J-Head Extruder Hotend
Suitable For M6 thread - V6 25.1mm Heatbreak
Material: High Quality Aluminum alloy
---------------------------------------------------------------------------------------------------------------------
Package include:
3 x Short V6 Heatsink
---------------------------------------------------------------------------------------------------------------------
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
10. 4 PCS 5015 Blower Cooling Fan, 50mm x 50mm x 15mm Ball Bearing Cooling Fan with 2 Pin Terminal for 3D Printer Hotend Extruder Heatsinks(24V 0.17A)
Feature
Power Connection: 2 Pin-ph2.55015 Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
Low noise while cooling the hot end of heatsinks.
Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
Size:50mm*50mm*15mm(L*D*H), Speed:650010%RPM, Noise:25dBA, Bearing: oil, DC 24V, 0.17A.
Description
You may find that your original 3D printer cooling fan has malfunctioned, or its blades have broken or been stripped entirely. These fans are necessary to prevent heat creep, which will affect or damage your extruder assembly, and thus your finished prints.
Specification:
Size: 50mm*50mm*15mm
Bearings: Ball bearing
Voltage : 24V
Current : 0.17A
Speed650010%RPM
Noise Level25dBA
Connector Type: 2 Pin-ph2.5
Cable Length: 110 CM