Saramonic SR-TM1 3 Pin XLR Input Cardioid Shotgun Microphone with Phantom Power for Sony XR160E CX350E FDR-AX1E Panasonic Canon LEGRIA HF R76 XC10 EOS C300 Camcorders (with Bracket and Foam Protector)

Related posts

Feature

Built-in Rechargeable Lithium Battery Provides up to 150-hours of run-time per charge; +48V Phantom may also be used
150 Hz High-Pass Filter Reduces unwanted low frequnecy noise from HVAC Systems, Traffic, etc
-10 dB PAD Attenuates the microphone input to allow for the recording of loud sounds without clipping
+6 dB High Frequency Boost Restores some of the high frequency content that is often lost when using a windscreen and improves the intelligibility of recorded speech
Fit in many environments for applications such as DSLR video making, ENG, filmmaking, field recording, sound design, and broadcast applications

Description

Overview
Saramonic SR-TM1 is a directional shotgun microphone features a cardioid polar pattern, built-in rechargeable battery, 150 Hz low cut switch, +6 dB high frequency boost, -10 db PAD and power button.
The Saramonic SR-TM1 features cardioid braodcast sound quality. The high pass filter is at 150 Hz. It can be used with Saramonic XLR9 transmitter plug for UWMIC9 microphone system in several environments for applications such as DSLR video making, ENG, filmmaking, field recording, sound design and broadcast applications.

Features
-10 dB Pad Attenuates the microphone input to allow for the recording of loud sounds without clipping.
150 Hz High Pass Filter Reduces low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording.
High Frequency Boost Restores some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone and improves the intelligibility of recorded speech.
Rechargeable built-in Li-ion battery The built-in battery supports at least 150 hours operation.

Specifications
Acoustic Principle: Line gradient
Directional Pattern: cardioid
Frequency Range: 20 to 20k Hz (selectable HPF 150 Hz)
Sensitivity: -303dB(0dB=1V/Pa,at 1KHz) 1.5V 2.2k
Output Impedance: 200 ohm
Maximum Output: 10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range: 120 dB (per IEC651)
Maximum SPL: 145 dB
Signal to Noise Ratio: 80 dB SPL (per IEC651)
Power: 48V phantom power; built-in lithium battery (battery life:150 hours)
Output Connection: 3-pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
Dimensions: 2.3 x 2.3 x 28.2 cm
Weight: 160g (About 5.65 oz)

Package
1* SR-TM1 microphone
1* Micro USB cable
1* Mic clip
1* Foam windshield
1* XLR cable