Excess Flow Regulator SET OF 3 MADOL [06CMPP/TI14-3]

Related posts

Feature

Standard P.O.L. connector threads into most refillable propane/butane cylinders to connect to regulators, hoses and other fittings
Soft Nose Design: Has O-ring to improve sealing and eliminate leaks. Straight through flow design - No excess flow safety device installed in this P.O.L.
Hose connector end is 1/4" MPT (MALE RIGHT HAND PIPE THREAD) type.
14 threads per inch, National Gas Outlet form, left hand thread 7/8"
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Description

Standard P.O.L. connector threads into most refillable propane/butane cylinders to connect to regulators, hoses and other fittings (POL = CGA 510; 0.855-14 NGO-LH; meaning Compressed Gas Association 510 standard, .885" diameter thread, 14 threads per inch, National Gas Outlet form, left hand thread). Soft Nose Design: Has O-ring to improve sealing and eliminate leaks. Straight through flow design - No excess flow safety device installed in this P.O.L. Not for use with gas grills and other low pressure devices without additional flow safety device. Hose connector end is 1/4" MPT (MALE RIGHT HAND PIPE THREAD) type. It is recommended for any product that needs installation to be performed by a qualified person or licensed contractor, plumber, or gas-fitter technician. Use pipe thread sealant between all connectors for proper seal and leak test all connections prior to use as a safety measure.