Related posts

Feature

4-in-1 Wall Detector- The stud finder offers 4 detection modes to meet all the needs of home wall DIY projects. The STUD mode is for finding and locating the center and edges of wood and metal studs up to 34 in. (19 mm) deep. DEEP mode is for scanning walls for 1.5in (38mm) deep studs. METAL mode is for locating metal (such as 12 inch rebar) up to 2.36 in. (60 mm) deep. And AC mode is for locating live AC wires up to 2 in (51mm) deep.
Accurate Detector Technology- Adopted to AUTOMATIC CALIBRATION technique - Pressing and holding the side button untill Completing calibration by placing the stud finder on the wall when the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy, greatly reduces errors in application and makes sure that most objects hidden in the wall can be detected.
Easy to Use- Only two buttons.First, depending on the tasks you have,you can switch to the desired mode(at the central of the device). Then, just press the "Scan button"(at the left side of the device) to automatic calibration and after scan horizontally across the object surface.Last, determine results based on LCD display and warning sounds.
Simple Design and Widely Application - The stud finder sensor with excellent circuit design and high quality components, long-time uses, has lightweight, is convenient to have around the home, office.
Lifetime WarrantyIf our stud finder sounds too good to be true, try it for yourself and discover just how well it is! We back each order with our lifetime guarantee, so if you're not completely satisfied, you can return your purchase for a full refund.

Description

Feature
To find the stud center quickly and accurately.
Easy to operate and read LCD display.
Auto calibration all functions detection.
Four scanning modes:Stud scan,Deep mode,Metal scan and AC scan.

Specifications
Model: TH240
Shell Material: ABS
Battery:6F 22 9V battery
Working current:<50mA
Stand-by current:<1uA
Stud detecting depth:wood & metal studs19 mm(0.75in)
Deep detecting depth:wood & metal studs 38 mm(1.5in)
Metal detecting depth:metal (such as 12 inch rebar) 60 mm(2.36 in)
AC live wire detecting depth: AC 110 ~ 220V 51mm(2 in)
Operating temperature & humidity: 0 ~ 40, <70%
Weight:234g(including battery)/0.5lb
Size: 68.5*28.9*160mm/2.69 *11.3 *6.3in

Whats in the box
1 x Stud Finder
1 x 9V Battery
1 x User Manual
1 x Warranty Card

Important Tips
-While calibrating, the device must not be placed directly over a stud, dense material such as metal, over a wet or newly painted area, it will not properly calibrate.
If all segments of the middle LCD parts flash on and off,and intermittence beeps when the activation button is pressed,move the device to a different location,release the power button and try to calibrate again.
-Detector will not detect AC live wire from a shielded position.
-Before scanning,please check the thickness of the position be detected is fit for detection.
-Detection depth and edge detection can vary due to moisture content of materials,wall texture,paint,etc.

NOTICES: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.Please make the item you received as the standard.