Related posts

Feature

Included: 2x 30g glue
This powchful useful patch and glue can repair your inflatable boats , seats bouncer airbed and other
Can be used on water toys etc

Description

product Included:
2x 30g glue
1x black plc. patch
1 x gray plc. patch
1 x white plc. patch
1 x dark blue plc. patch plc.
patch size : 3.93 x 3.93 inch

Procedures for repairing hole

(1) Exhaust the inflatable product fully, clean the air leakage area completely and remove all dirt.
(2) Take out the repair piece, pay attention that this piece of rubber shall be a few centimeters larger than the broken area.
(3) Apply the repair glue on the air leakage area and bottom of the repair piece evenly, don't apply more. In total apply the glue twice, 5 minutes between each time. After applying the glue twice, in order to make the glue sticky, wait for 10-15 minutes.
(4) Stick the repair piece with the glue side to the damaged area, press with blunt tool vigorously (the hair drier could be used at this time, the hot wind could strengthen the viscosity).
(5) Apply little glue around the repair piece after 12 hours.
(6) The repair work is completed after 24 hours. The damaged product is revitalized!


Warm tips:
1. Never let it to contact eyes or swallow it.
2. In order to avoid the glue from deteriorating or volatilizing after long-time laying, use preservative film or plastic bag to cover the month after using every time, and then tighten the glue cover.