Related posts

Feature

Connector TypeIPEX4
Wire Material:RF0.81 silver plated
Application: 2.4G remote control, monitor, model airplane, bluetooth etc
Suit for Frsky XM XM+ X4R/X4RSB/S6R/D series/TF Series receiver 2.4G Receiver
Package with protection tube, it help making receiver antenna fixed proper angle to achieve best signal and no need worry that propeller cut down the antenna

Description

XM and XM+ X4R/X4RSB/S6R/D series/TF Series receiver 2.4G Receiver 150mm Compatible with long-range antenna

A.Electrical Characteristics
Frequency: 2400 to 2500 MHz
SWR:less than 2.0
Antenna Gain: 2.0
Polarization: Linear
Impedance :50 Ohm

B.Material and Mechanical Characteristics
Cable Type:RF 113
Connector Pull Test:more than 2 Kg

C.Environmental
Operation Temperature :-40-+65
Storage Temperature:-40-+80

Notice: IPEX1 is for FrSky regular receiver(V series,D series and TF series)
IPEX4 is for FrSky new receiver( XM and XM+ X4R/X4SB/S6R and etc)

This antenna is new thin type 150mm length for new production X4RSB, S6R receiver.
Length:15cm
Compatibilty: New X4RSB/X4R, and S6R receivers.

Attention:
1. FrSky Changed to New Antenna in X4RSB/X4R, S6R receivers .
2.New Antenna is SMALLER connector and Thinner Antenna Wire.
3.Same Length, and lighter compare with old version;
4.This antenna is thin type particular for new X4RSB, X4R and S6R receiver, it is not compatible with other receivers.

Pack list:
5x antenna
5x protection tube